doorpanel_july (10).JPG 542 hits | 72.88 KB | Posted: 7/28/09 Each wire was pulled out and taped. It was a mess. It was all due to the dimples that were drilled out before I got it were jagged and it rubbed through the wiring harness. Be sure there is no sharp edges, I'm lucky all it got was my door panel.
doorpanel_july (7).JPG 443 hits | 75.87 KB | Posted: 7/28/09 Wiring harness was a melted blob of wires.
doorpanel_july.JPG 483 hits | 78.28 KB | Posted: 7/28/09 After it caught on fire.
door_bronco (1).JPG 445 hits | 74.48 KB | Posted: 7/28/09 An older pic to show what the old speaker looked like.
Photo_070609_007.jpg 579 hits | 53.24 KB | Posted: 7/26/09 This shows the hose thats supposed to be connected.
Photo_070609_006.jpg 551 hits | 58.54 KB | Posted: 7/26/09 Note the dark black on the firewall, good sign of where it's coming from.
Most Viewed Files
Photo_070609_004.jpg 1327 hits | 43.11 KB | Posted: 7/26/09 If you have an exhaust leak, it may not be the manifold. Follow the hose from the smog pump to the back of the intake, it will go into a checkvalve on the crossover tube between the heads. The top of the checkvalve was rotted off inside the hose and ...
tailgate (9).jpg 687 hits | 55.02 KB | Posted: 7/25/09 Walmart can of Krylon
Photo_070609_007.jpg 579 hits | 53.24 KB | Posted: 7/26/09 This shows the hose thats supposed to be connected.
Photo_070609_006.jpg 551 hits | 58.54 KB | Posted: 7/26/09 Note the dark black on the firewall, good sign of where it's coming from.
doorpanel_july (10).JPG 542 hits | 72.88 KB | Posted: 7/28/09 Each wire was pulled out and taped. It was a mess. It was all due to the dimples that were drilled out before I got it were jagged and it rubbed through the wiring harness. Be sure there is no sharp edges, I'm lucky all it got was my door panel.
.JPG)
.JPG)
.JPG)
.jpg)
.jpg)
.JPG)