rocker_alignment.jpg
1297 hits | 75.78 KB | Posted: 2/11/04
Rocker Alignment.

BCO_ENG_new1.jpg
1226 hits | 57.33 KB | Posted: 2/11/04
Rocker Detail.

IM000299.AVI
1762 hits | 3.77 MB | Posted: 8/22/03
2003 mud-bog/drag. 2nd run.
NOOOO. That is NOT my exhaust system you hear in the first part of the video. LOL!

IM000296.AVI
1618 hits | 4.75 MB | Posted: 8/22/03
2003 mud-bog/drag. 1st run.

susp1.jpg
1506 hits | 35.28 KB | Posted: 6/30/03
Completed suspension mods.
Poly bushings.
Drop pitman arm.
Axle housing drop brackets.
New rotors, calipers, ball joints, tie rods, wheel bearings, etc etc.

spring_mount.jpg
1267 hits | 24.46 KB | Posted: 6/30/03
Here's a cross section of how my 1" spacers are installed.

bushing1.jpg
1547 hits | 31.92 KB | Posted: 6/30/03
Custom 1" spring perch spacer.
Ingall's #532 adjustable caster/camber bushing.
Rancho 1" springs.

engine2.jpg
1408 hits | 39.98 KB | Posted: 6/30/03
Assembled, and ready for installation.

windage_mod1.jpg
1277 hits | 27.44 KB | Posted: 6/30/03
Had to do some minor grinding to get the oil pump pickup to fit.
It made more sense to clearance the hole in the windage tray,
than to bend the mounting tab (and weaken it) on the pickup.

bronc1.jpg
1767 hits | 58.01 KB | Posted: 6/30/03
Here's my Lab-Hab, that's actually clean for a change.
That'd be Auggie-Doggie, ready to work.

IM000299.AVI
1762 hits | 3.77 MB | Posted: 8/22/03
2003 mud-bog/drag. 2nd run.
NOOOO. That is NOT my exhaust system you hear in the first part of the video. LOL!

IM000296.AVI
1618 hits | 4.75 MB | Posted: 8/22/03
2003 mud-bog/drag. 1st run.

bushing1.jpg
1547 hits | 31.92 KB | Posted: 6/30/03
Custom 1" spring perch spacer.
Ingall's #532 adjustable caster/camber bushing.
Rancho 1" springs.

mud1.jpg
1543 hits | 41.1 KB | Posted: 6/30/03
My first run. What a blast!
Finished 6th in class (23 trucks), and 8th overall (34 trucks).
Next time, I'll use 4-lo.
I was only taching up to 3,000rpm's at the end of the pit.

susp1.jpg
1506 hits | 35.28 KB | Posted: 6/30/03
Completed suspension mods.
Poly bushings.
Drop pitman arm.
Axle housing drop brackets.
New rotors, calipers, ball joints, tie rods, wheel bearings, etc etc.

engine2.jpg
1408 hits | 39.98 KB | Posted: 6/30/03
Assembled, and ready for installation.

rocker_alignment.jpg
1297 hits | 75.78 KB | Posted: 2/11/04
Rocker Alignment.

windage_mod1.jpg
1277 hits | 27.44 KB | Posted: 6/30/03
Had to do some minor grinding to get the oil pump pickup to fit.
It made more sense to clearance the hole in the windage tray,
than to bend the mounting tab (and weaken it) on the pickup.