letsstart.jpg
460 hits | 76.4 KB | Posted: 10/27/06

Here is the drivers side ball joint replacement. Here we are with the wheel in place.
as-we-started.jpg
426 hits | 79.78 KB | Posted: 10/27/06

Ok the wheel is off. I was lazy here please put a Jack stand under the frame or front axle do not wo...
caliper-hung.jpg
406 hits | 91.61 KB | Posted: 10/27/06

Remove the caliper (do not just let it hang. i got a set of "S" hooks and these work well here)
nolockouts.jpg
472 hits | 86.91 KB | Posted: 10/27/06

Now the lock outs are off.
no-brake.jpg
478 hits | 90.71 KB | Posted: 10/27/06

ok now the hub and rotor assembly are off.
no-rotoe-or-hub.jpg
505 hits | 89.61 KB | Posted: 10/27/06

now the dust shield and spindel assemble are removed.
no spindal.jpg
447 hits | 90.26 KB | Posted: 11/3/06

Here it is without the spindal
noknuckle.jpg
463 hits | 79.79 KB | Posted: 10/27/06

ok now the axle and then the knuckle is removed.
old-spindal2.jpg
567 hits | 87.76 KB | Posted: 10/27/06

here is the knuckle assembly ready to press out the ball jints. I ran into an issue the C-press was...
steering-stop.jpg
448 hits | 40.63 KB | Posted: 10/27/06

Here is the steering stop for the pass side knuckle.
old-spindal.jpg
425 hits | 71.83 KB | Posted: 10/27/06

Here is the bent knuckle. well off to the junk yard as it is sunday and no one has a new one. i foun...
noballsspindal.jpg
465 hits | 84.56 KB | Posted: 10/27/06

Ok i got back from the junk yard and the ball joints seemed ok, but i had new ones sitting onthe ben...
new-tool.jpg
473 hits | 76.58 KB | Posted: 10/27/06

well as i said i did the pass side ball joints with the c press but this side did not want to work w...
oldballs.jpg
489 hits | 72.17 KB | Posted: 10/27/06

Here are the old Ball joints.
new-joints.jpg
511 hits | 67.92 KB | Posted: 10/27/06

Here are the new Ball joints. i now got all 4 replaced.
new-lower-in.jpg
451 hits | 74.18 KB | Posted: 10/27/06

Here is the new lower ball joint in place. the new press just poped it right in.
ball joints3.jpg
488 hits | 74.14 KB | Posted: 11/9/06

I did not do the ball joints at the same time. i did the pass side and then the drivers side. here w...
balljopintshub.jpg
455 hits | 103.5 KB | Posted: 11/9/06

here is a better shot od the completed pass side ball joints.

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog