IMG_0019.JPG 538 hits | 46.05 KB | Posted: 9/30/08 I'm just about to upgrade my 9004s to Streetglow 80/100 bulbs and I didn't want to burn down the TC ...
IMG_0074.JPG 494 hits | 36.32 KB | Posted: 9/30/08 I wanted 12 gauge wires (left) all the way from the headlight pins to the battery (fused of course)....
IMG_0056.JPG 479 hits | 32.59 KB | Posted: 9/30/08 Just stick a pin or nail into the top of each terminal and you'll depress the tang so you can just p...
IMG_0034.JPG 465 hits | 19.8 KB | Posted: 9/30/08 Pry open the tang. That will allow you to pull back the weatherpack style rubber grommet, out of the...
IMG_0036.JPG 582 hits | 27.07 KB | Posted: 9/30/08 There's no need to try to pry open the next tang as you'll never get 12 gauge wire to fit where the ...
IMG_0069.JPG 483 hits | 24.85 KB | Posted: 9/30/08 Press down with the carpet knife and just pull up on the wire and bend and break the rest of the str...
IMG_0059.JPG 436 hits | 25.13 KB | Posted: 9/30/08 What you're left with is exactly what you're after, to solder the 12 gauge wire to.
IMG_0061.JPG 460 hits | 22.77 KB | Posted: 9/30/08 Slice the snout off the grommet, as the 10 gauge wire doesn't need the extra length.
IMG_0067.JPG 478 hits | 22.08 KB | Posted: 9/30/08 Slip the grommet over the new 10 gauge wire, crimp the outer tangs onto the wire and solder it solid...
IMG_0077.JPG 597 hits | 36.14 KB | Posted: 9/30/08 Quite the difference now, with the 10 gauge wire next to the two 18 gauge wires. They just push back...