BrushesRemoved.jpg 657 hits | 54.12 KB | Posted: 3/8/06 When you remove the 2 screws....the brush assembly simply comes off of the regulator (Posted in: Voltage Regulator Swap)
BrushesRemovedTop.jpg 681 hits | 45.93 KB | Posted: 3/8/06 Another shot of the brushes removed (Posted in: Voltage Regulator Swap)
BrushRetainer.jpg 667 hits | 55.8 KB | Posted: 3/8/06 When you go to reinstall the regulator the brushes have to be held back into the housing. Use a paper clip to hold them in place. (Posted in: Voltage Regulator Swap)
Brushes1.jpg 646 hits | 54.66 KB | Posted: 3/8/06 With the retaining screws tight, press the brushes into the housing. (Posted in: Voltage Regulator Swap)
BrushesLocked.jpg 654 hits | 60.38 KB | Posted: 3/8/06 Here you can see that the brushes are held in place with the paper clip (Posted in: Voltage Regulator Swap)
BrushesLocked1.jpg 740 hits | 58.68 KB | Posted: 3/8/06 Another view of the brushes held in place (Posted in: Voltage Regulator Swap)
InstallingReg.jpg 669 hits | 76.66 KB | Posted: 3/8/06 To install, simply lay the regulator into place. (Posted in: Voltage Regulator Swap)
InstallingReg1.jpg 607 hits | 82.94 KB | Posted: 3/8/06 Ready to bolt in (Posted in: Voltage Regulator Swap)
InstallingReg2.jpg 650 hits | 77.12 KB | Posted: 3/8/06 Tighten the mounting bolts (Posted in: Voltage Regulator Swap)
RemovingLock.jpg 648 hits | 64.24 KB | Posted: 3/8/06 When the regulator is in place and screws tightened, pull the paper clip out. (Posted in: Voltage Regulator Swap)
RemovingLock1.jpg 671 hits | 66.17 KB | Posted: 3/8/06 You will hear the brushes pop out of the housing.....and your done! (Posted in: Voltage Regulator Swap)
P1000054.jpg 648 hits | 121.62 KB | Posted: 7/31/06 Can you believe it was left in a parking lot? (Posted in: 1992 Mustang LX)
P1000056.jpg 673 hits | 111.13 KB | Posted: 7/31/06 Someone started body work. Plenty of work still too do (Posted in: 1992 Mustang LX)
P1000058.jpg 658 hits | 102.82 KB | Posted: 7/31/06 A little weathered. (Posted in: 1992 Mustang LX)
P1000060.jpg 709 hits | 91.61 KB | Posted: 7/31/06 Needs a good cleaning, but not bad for an abandoned car (Posted in: 1992 Mustang LX)
P1000071.jpg 676 hits | 101.04 KB | Posted: 7/31/06 Bone stock 5.0. Completely un-molested....even the air silencer is in the fender! (Posted in: 1992 Mustang LX)
1merc.jpg 943 hits | 70.69 KB | Posted: 5/1/10 when i first got it, lifted the rear end and piped it (Posted in: my merc)
da merc.jpg 829 hits | 56.88 KB | Posted: 5/1/10 (Posted in: my merc)
