102_0417.JPG
1102 hits | 90.63 KB | Posted: 5/2/10
View with the wheel off and the clamp depressing the caliper.

102_0418.JPG
703 hits | 69.25 KB | Posted: 5/2/10
Make sure that your clamp depresses the caliper all the way so you can get the brake assembly off la...

102_0419.JPG
624 hits | 77.46 KB | Posted: 5/2/10
These WERE some shiny new Monroe shocks. Not so much anymore, haha.

102_0420.JPG
641 hits | 75.1 KB | Posted: 5/2/10
Loosen the Torx screws and pull the top of the hub off.

102_0421.JPG
991 hits | 86.36 KB | Posted: 5/2/10
The lower half of the hub assembly should then slide right out.

102_0422.JPG
660 hits | 72.81 KB | Posted: 5/2/10
Contrary to the previous owner's belief, tapioca pudding is in fact NOT an effective bearing/hub lub...

102_0423.JPG
585 hits | 70.9 KB | Posted: 5/2/10
Another picture of how bad the grease had gotten inside there. Whether it was water, or just the wro...

102_0424.JPG
629 hits | 105.1 KB | Posted: 5/2/10
The entire hub assembly, with that little keeper clip. Remember that it is there to space the clip r...

102_0425.JPG
648 hits | 79.64 KB | Posted: 5/2/10
Right about now is when you'll need that handy (and expensive) 4-pronged bearing removal socket.

102_0426.JPG
665 hits | 108.91 KB | Posted: 5/2/10
Hub assembly with all of the various rings and keepers that sit behind it on the spindle. All of whi...