michael collins > 1983 Ford Bronco > open folder Sky Jacker Class II TTB drop mounts > setting-the-jack-stand.jpg

File 11 of 26
Prev | Next

Share This
Url
Tag
Img
Thumb

setting-the-jack-stand.jpg this is what i do to hold the TTB as i did the swap. i put upward presure on the outside of the beam with a jack stand then pull the inside bolt and ues the floor jack as the up / down pivet point. this worked very well. I still have the front sway bar so it limited the outward spread of the axle. i did have to use a come along to pull it back in when i was done.
setting-the-jack-stand.jpg | Hits: 896 | Posted on: 8/29/05 | View original size (153.45 KB)

this is what i do to hold the TTB as i did the swap. i put upward presure on the outside of the beam with a jack stand then pull the inside bolt and ues the floor jack as the up / down pivet point. this worked very well. I still have the front sway bar so it limited the outward spread of the axle. i did have to use a come along to pull it back in when i was done.