HPIM0063.JPG
621 hits | 69.28 KB | Posted: 4/14/07
FMS cam sprocket before machining

HPIM0063.JPG
540 hits | 69.28 KB | Posted: 4/14/07
FMS cam sprocket before machining

magnumpaint.jpg
1620 hits | 66.58 KB | Posted: 1/11/07
After the first day of installation, the black paint in the center of the wheel started flaking off...alot. The other 3 wheels have this problem, just not as bad as this wheel. Piss poor quality.

HPIM0723.JPG
625 hits | 90.88 KB | Posted: 11/13/06
Hooking up all the sensors-ran out of time, so after 3pulls and 6k rpm limit, with no changes, 641ft lbs torque, 656 hp. the hp was still climing at 6k.

HPIM0727.MPG
683 hits | 6.21 MB | Posted: 11/13/06
On the SuperFlow 902 dyno, warming up before the 1st pull

HPIM0711.JPG
549 hits | 120.02 KB | Posted: 11/13/06
Loaded and ready to take the 545 to the dyno

HPIM0679.JPG
617 hits | 72.68 KB | Posted: 9/24/06
My Phantom II gauges were working fine until the elec temp gauge quit!

HPIM0678.MPG
804 hits | 36.94 MB | Posted: 9/24/06
A LARGE, crappy quality video file (taken with my digital camera) of the initial start-up of my 545 on the test stand.

HPIM0677.JPG
600 hits | 89.18 KB | Posted: 9/24/06
Battery, MSD Digital6, wires going to MSD dist., +/- battery wires, alt wire from alt to battery.

HPIM0301.JPG
2542 hits | 98.01 KB | Posted: 2/25/06
Three out of four wheels and tires from Summit Racing were acceptable quality.

magnumpaint.jpg
1620 hits | 66.58 KB | Posted: 1/11/07
After the first day of installation, the black paint in the center of the wheel started flaking off...alot. The other 3 wheels have this problem, just not as bad as this wheel. Piss poor quality.

HPIM0303.JPG
1413 hits | 103.15 KB | Posted: 2/25/06
Wheels are marketed by Wheel Vintiques. I was surprised at the quality chrome.

girl.jpg
1404 hits | 23.66 KB | Posted: 2/4/05

HPIM0678.MPG
804 hits | 36.94 MB | Posted: 9/24/06
A LARGE, crappy quality video file (taken with my digital camera) of the initial start-up of my 545 on the test stand.

HPIM0305.JPG
694 hits | 101.85 KB | Posted: 2/25/06
The specs are dust on the rims from my garage, but the deep chrome is excellent. Rim size is 15X7 with 4.5 backspacing. Tire size is 255/60-15

HPIM0727.MPG
683 hits | 6.21 MB | Posted: 11/13/06
On the SuperFlow 902 dyno, warming up before the 1st pull

DiamondSpecCard.jpg
658 hits | 60.38 KB | Posted: 5/18/05
piston spec card

HPIM0723.JPG
625 hits | 90.88 KB | Posted: 11/13/06
Hooking up all the sensors-ran out of time, so after 3pulls and 6k rpm limit, with no changes, 641ft lbs torque, 656 hp. the hp was still climing at 6k.