|
|
The upper letter in the combo aligns with the notch in the body of the bushing. With the bushing still out, you can use a pair of pliers to spin the nut till the letter aligns with the notch.
The lower letter has the whole bushing align with the outside tab (the tab that is away from the vehicle not toward it) of the axle. You msut have the upper letter set before this.
My bushing needed to be set at UV/UV or UV over UV. That means i have to turn the top part of the bushing till the letters UV align with the notch in the bushing. Since UV also happens to be the bottom letter, i have the letters UV align with that tab on the axle.
|
