Donor04.jpg
0 hits | 120.1 KB | Posted: 3/16/25
Other than a traction control knob and a tow/haul/hill descent button, this console was loaded. The rear HVAC control had been taken, but I wouldn't have needed it anyway. I would like the 110VAC outlet, but I forgot to snag the inverter. It has colo...
(Posted in: Floor Console & Shifter)

Console15.jpg
0 hits | 42.92 KB | Posted: 3/16/25
This collects all the circuits in the floor console into 1 diagram.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: Floor Console & Shifter)

Mounts2.jpg
0 hits | 123.21 KB | Posted: 3/16/25
The console takes 2 tunnel brackets not used with the police plate. Some of the police wiring can be used to power the console, but several wires will need to be added or rearranged.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: Floor Console & Shifter)

20250304_214008.jpg
0 hits | 87.44 KB | Posted: 3/16/25
The sheer quantity of wires in the console's main connector looks overwhelming. But once organized by function, it becomes very manageable. Top priority goes to the park detect switch because (as I learned the hard way) the BCM will stay awake until ...
(Posted in: Floor Console & Shifter)

20250311_155943.jpg
0 hits | 113.66 KB | Posted: 3/16/25
The column-shift wires were cut in the dash harness and extended through to the right side of the console where its connector is.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: Floor Console & Shifter)

20250303_170343.jpg
0 hits | 125.71 KB | Posted: 3/16/25
The console now has enough wiring connected for the front seats to be installed. A [url=https://3dub200.com/collections/ford-explorer/products/11-19-ford-explorer-police-interceptor-utility-center-console-rear-temperature-control-delete-panel]custom ...
(Posted in: Floor Console & Shifter)

IMG_3811.JPG
0 hits | 41.35 KB | Posted: 10/9/25
(Posted in: 2020 Admin Console)

IMG_3810.JPG
0 hits | 37.62 KB | Posted: 10/9/25
(Posted in: 2020 Admin Console)

IMG_3809.JPG
0 hits | 34.51 KB | Posted: 10/9/25
(Posted in: 2020 Admin Console)

IMG_3812.JPG
0 hits | 37.89 KB | Posted: 10/9/25
(Posted in: 2020 Admin Console)

IMG_3813.JPG
0 hits | 31.24 KB | Posted: 10/9/25
(Posted in: 2020 Admin Console)

IMG_3814.JPG
0 hits | 46.95 KB | Posted: 10/9/25
(Posted in: 2020 Admin Console)

s-l1600--.jpg
0 hits | 32.19 KB | Posted: 10/9/25
(Posted in: 2020 Admin Console)

s-l1600333.jpg
0 hits | 39.22 KB | Posted: 10/9/25
(Posted in: 2020 Admin Console)

s-l16001111.jpg
0 hits | 46.02 KB | Posted: 10/9/25
(Posted in: 2020 Admin Console)

s-l16002222z.jpg
0 hits | 39.1 KB | Posted: 10/9/25
(Posted in: 2020 Admin Console)

s-l16002222z.jpg
0 hits | 39.1 KB | Posted: 10/9/25
(Posted in: 2020 Admin Console)

DomeLEDs.jpg
0 hits | 51.25 KB | Posted: 9/10/25
LED Dome Lamps
(Posted in: Spare Parts)

LightBar.jpg
0 hits | 49.33 KB | Posted: 6/7/25
Why couldn't Ford and the light bar companies have gotten together on a simple way to use the normal luggage rack rails?
(Posted in: As-Bought)

Paint1.jpg
0 hits | 128.23 KB | Posted: 2/13/25
The interior has scuffs & stains. Apparently, a can of green spray paint leaked or exploded back here.
(Posted in: My 2016 PIU)

Drawbar.jpg
0 hits | 120.55 KB | Posted: 6/5/25
The last piece is a locking adjustable Aluminum draw bar with 2 & 2-5/16 balls.
(Posted in: Hitch Receiver)

Crap.jpg
0 hits | 84.03 KB | Posted: 5/11/25
The seats that don't tumble came out, as did the damaged '15 Ltd. rear carpet, and the last piece of the floor reinforcement. After the '17 XLT carpet dried, it was vacuumed to remove the last of the hair from it.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

Flips.jpg
0 hits | 78.77 KB | Posted: 5/11/25
The strike bars & '17 XLT carpet went in (with the rear console delete cover), then the floor mats & WeatherTech 443592. Now it has fold & tumble 2nd-row seats. Even though the stone upholstery doesn't match the front seats', it doesn't look bad.
IF...
(Posted in: 2nd Row Seats)

Compared.jpg
0 hits | 57.09 KB | Posted: 5/10/25
Not bad for $60 and a few hours' work.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

NWatk12X.jpg
0 hits | 82.65 KB | Posted: 5/9/25
Another junker 12 XLT
(Posted in: Spare Parts)

Chairs03.jpg
0 hits | 110.4 KB | Posted: 5/9/25
These came from a '17 XLT that had been hit so hard that the front passenger door & its opening were obliterated. The floor was wrinkled under both front seats, which couldn't be unbolted. But these came out fairly easily.
IF THE IMAGE IS TOO SMALL,...
(Posted in: 2nd Row Seats)

Acquired.jpg
0 hits | 59.74 KB | Posted: 5/9/25
The first step was to disassemble them, which turned out to be easier than it looked.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

Carpet.jpg
0 hits | 71.72 KB | Posted: 5/9/25
The rear carpet was in good shape, so I bought & washed it, too.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

FloorMats.jpg
0 hits | 77.26 KB | Posted: 5/9/25
Since the mats were there & not too rough, I got them, too.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

Cleaned.jpg
0 hits | 48.6 KB | Posted: 5/9/25
The upholstery looked pretty bad, but after scrubbing it with cream hand cleaner, and running it through the washing machine, it looks a lot better than you'd expect.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

Spoiler16PIU.jpg
0 hits | 42.68 KB | Posted: 4/29/25
Spoiler Removal

Apparently, it's very difficult.
----------------------------------------------------------------------------------------------
Rear Spoiler Removal
IF THE IMAGE IS TOO SMALL, click it.
__________________
NOTE: If equipped wit...
(Posted in: General Tech)

Ctsy16.jpg
0 hits | 44.36 KB | Posted: 4/29/25
Courtesy Lamps 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

ExtrLight16.jpg
0 hits | 48.97 KB | Posted: 4/29/25
Exterior Lamps 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

Fog16.jpg
0 hits | 65.13 KB | Posted: 4/29/25
Fog Lamps 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

FusesBCN.jpg
0 hits | 62.21 KB | Posted: 4/29/25
BCM Fuses 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

Headliner16Conn.jpg
0 hits | 51.6 KB | Posted: 4/29/25
Headliner Connector 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

Illumination16.jpg
0 hits | 36.95 KB | Posted: 4/29/25
Illumination 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

Keypad16b.jpg
0 hits | 84.1 KB | Posted: 4/29/25
Keypad 2016 Explorer
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

PW16.jpg
0 hits | 54.35 KB | Posted: 4/29/25
Power Windows 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

BodyF.jpg
0 hits | 146.33 KB | Posted: 2/13/25
Most of the wrap was removed before the auction, except the front tow point cover, and some scraps around the door handles & taillights.
(Posted in: As-Bought)

BodyLHF.jpg
0 hits | 131.83 KB | Posted: 2/13/25
The hood has the typical corrosion along the front edge. But there's surprisingly little body damage. The worst might be the holes for the grill guard, which I'd like to eliminate because it makes other drivers slow down.
(Posted in: As-Bought)

BodyLHR.jpg
0 hits | 128.15 KB | Posted: 2/13/25
Most of the wrap was removed before the auction, except the front tow point cover, and some scraps around the door handles & taillights (now gone). But there's surprisingly little body damage.
(Posted in: As-Bought)

BodyLHS.jpg
0 hits | 115.37 KB | Posted: 2/13/25
I plan to remove the spotlight, dog dishes, wrap scraps, duct tape on the roof, and probably the grill guard.
(Posted in: As-Bought)

BodyRHR.jpg
0 hits | 130.52 KB | Posted: 2/13/25
Most of the wrap was removed before the auction, except the front tow point cover, and some scraps around the door handles & taillights (now gone). But there's surprisingly little body damage. I plan to add a factory hitch receiver & roof rack.
(Posted in: As-Bought)

BodyRH.jpg
0 hits | 153.3 KB | Posted: 2/13/25
Most of the wrap was removed before the auction, except the front tow point cover, and some scraps around the door handles & taillights (now gone). But there's surprisingly little body damage. I plan to remove the spotlight, dog dishes, wrap scraps, ...
(Posted in: As-Bought)