|
|
![[i]By Arthur Jensen[/i]
[b]Blingin' Billet Bezel: We Install a PPM Custom's Chrome Billet 'Busa ...](http://www.supermotors.net/getfile/431806/thumbnail/busa1b.jpg)
Hits: 768
Size: 88.55 KB
Posted: 9/12/06
[i]By Arthur Jensen[/i]
[b]Blingin' Billet Bezel: We Install a PPM Custom's Chrome Billet 'Busa ... | 
Hits: 444
Size: 74.29 KB
Posted: 9/12/06
Start by removing the three Allen screws that hold the lower half of the inner fairing to the bike. | 
Hits: 420
Size: 73.56 KB
Posted: 9/12/06
Release the pins that hold the inner fairing to the windscreen supports by pushing in the center wit... | 
Hits: 422
Size: 85.43 KB
Posted: 9/12/06
From the top, carefully pull the inner fairing away from the bike. The lower edge fits into the fra... | 
Hits: 474
Size: 105.17 KB
Posted: 9/12/06
The stock 'Busa bezel is held on with two Phillips screws along the bottom edge and double sided tap... |
Hits: 564
Size: 99.25 KB
Posted: 9/12/06
Since the bezel is still attached by the double-sided tape, you will have to pry it up carefully to ... | 
Hits: 1453
Size: 83.13 KB
Posted: 9/12/06
Before mounting the PPM Custom billet bezel with the provided adhesive, set the new part in place to... | 
Hits: 498
Size: 90.58 KB
Posted: 9/12/06
To permanently mount the bezel, peel the cover-strips off the double-sided tape on the back of the P... | 
Hits: 447
Size: 80.96 KB
Posted: 9/12/06
Once the screws are tight, install the new foam weather seal around the bottom and sides of the beze... | 
Hits: 434
Size: 100.3 KB
Posted: 9/12/06
|
Hits: 528
Size: 101.14 KB
Posted: 9/12/06
Next, install the inner fairing. Starting from the rear of the fairing pieces, work your way forward... | 
Hits: 401
Size: 77 KB
Posted: 9/12/06
| 
Hits: 1193
Size: 69.62 KB
Posted: 9/12/06
To install the pins that hold the inner fairing to the windscreen supports you must first reset them... | 
Hits: 457
Size: 78.3 KB
Posted: 9/12/06
Now that the fairings are in place, tighten all three Allen screws. | 
Hits: 874
Size: 118.49 KB
Posted: 9/12/06
Seen side-by-side, the stock and PPM bezel are quite a contrast. While the stock part’s faux-carb... |
PPM Custom's Chrome Billet Hayabusa Gauge Bezel