[i]By Arthur Jensen[/i]

[b]Blingin' Billet Bezel: We Install a  PPM Custom's Chrome Billet 'Busa ...
Url
Tag
Img
Thumb
Start by removing the three Allen screws that hold the lower half of the inner fairing to the bike.
Url
Tag
Img
Thumb
Release the pins that hold the inner fairing to the windscreen supports by pushing in the center wit...
Url
Tag
Img
Thumb
From the top, carefully pull the inner fairing away from the bike.  The lower edge fits into the fra...
Url
Tag
Img
Thumb
The stock 'Busa bezel is held on with two Phillips screws along the bottom edge and double sided tap...
Url
Tag
Img
Thumb
Since the bezel is still attached by the double-sided tape, you will have to pry it up carefully to ...
Url
Tag
Img
Thumb
Before mounting the PPM Custom billet bezel with the provided adhesive, set the new part in place to...
Url
Tag
Img
Thumb
To permanently mount the bezel, peel the cover-strips off the double-sided tape on the back of the P...
Url
Tag
Img
Thumb
Once the screws are tight, install the new foam weather seal around the bottom and sides of the beze...
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Next, install the inner fairing. Starting from the rear of the fairing pieces, work your way forward...
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
To install the pins that hold the inner fairing to the windscreen supports you must first reset them...
Url
Tag
Img
Thumb
Now that the fairings are in place, tighten all three Allen screws.
Url
Tag
Img
Thumb
Seen side-by-side, the stock and PPM bezel are quite a contrast.  While the stock part’s faux-carb...
Url
Tag
Img
Thumb

Rearview Mirror
About SM | Advertising | Affiliates | Contact SM | Discounts | FAQ/Help | Legal | Services | Sponsors | Support Forums
Copyright © 1998-2007, LHB Companies LLC, DBA SuperMotors.
All rights reserved. Duplication & reproduction is strictly prohibited.
supermotors.net v4.1.3 ChangeLog

Sponsored Links:
Garcia Marquez | WoW Gold | Online Image Resizer | Compare | Mortgages