Bronco with GTO (1).JPG
618 hits | 85.96 KB | Posted: 10/13/10
First time towing. Fully stock Bronco. Stopped at a gas station before heading to the drag strip w...

Bronco with GTO (2).JPG
535 hits | 90.51 KB | Posted: 10/13/10
The poor guy rode like that even with a light load in the back.

Bronco with GTO.JPG
528 hits | 90.99 KB | Posted: 10/13/10
Air shocks solved this problem.

Eddie w Big Boy shoes&topless.JPG
737 hits | 73.46 KB | Posted: 10/14/10
First time topless and with new tires/shocks.

Eddie w Big Boy shoes&topless (1).JPG
529 hits | 74.52 KB | Posted: 10/14/10
First time topless and with new tires/shocks.

Eddie's new halo glasses and tails.JPG
496 hits | 71.8 KB | Posted: 10/14/10
Custom BMW halo lights. Matches The Silver Hornet (GTO)

Eddie's new halo glasses and tails (1).JPG
578 hits | 78.27 KB | Posted: 10/14/10
Also clear tails

Eddie's hat (1).JPG
421 hits | 49.67 KB | Posted: 10/18/10
Newly painted cab roof. Was faded and rusty.

Eddie's hat.JPG
405 hits | 62.84 KB | Posted: 10/18/10
Newly painted cab roof. Was faded and rusty.

White top.JPG
407 hits | 63.75 KB | Posted: 10/18/10
Painted FG top white to match cab roof.

White top (1).JPG
567 hits | 58.34 KB | Posted: 10/18/10
Pretty good for a rattle can job

White top (2).JPG
485 hits | 62.9 KB | Posted: 10/18/10
Still brown inside.

DIY bedliner with d-rings (1).JPG
704 hits | 62.46 KB | Posted: 11/19/10
Hurculiner DIY bedliner.

DIY bedliner with d-rings (2).JPG
789 hits | 74.84 KB | Posted: 11/19/10
Replaced body mounting bolt access covers with d-rings.

DIY bedliner with d-rings (3).JPG
487 hits | 88.73 KB | Posted: 11/19/10
Not for heavy strapping down. Only held in place by 2 #8 screws.

DIY bedliner with d-rings.jpg
449 hits | 58.22 KB | Posted: 11/19/10
Not too bad for a roll on.

New headliner.jpg
532 hits | 37.58 KB | Posted: 11/19/10
New headliner and visors installed. The white marks are where I was thinking of mounting an Explore...

Newly covered seats.jpg
486 hits | 69.71 KB | Posted: 11/19/10
Newly reupholstered seats installed.

Newly covered seats (1).JPG
474 hits | 52.41 KB | Posted: 11/19/10
Newly reupholstered seats installed.

DIY bedliner w drings and customized side panels.JPG
1360 hits | 79.44 KB | Posted: 11/24/10
I wanted to retain a factory appearance but remove the majority of excess plasic in the cargo area. ...

DIY bedliner w drings and customized side panels (1).JPG
973 hits | 82.89 KB | Posted: 11/24/10
So I measured and cut the plasic panels and support straps behind it. I then bent the panels at a 9...

DIY bedliner w drings and customized side panels (2).JPG
875 hits | 73.32 KB | Posted: 12/2/10
Finished. Getiing ready to put the top back on.....

DIY bedliner w drings and customized side panels (3).JPG
587 hits | 94.31 KB | Posted: 12/2/10
Closeup of tailgate jam area. Went a little nuts with the bedliner. But that paint is tough when i...

DIY bedliner w drings and customized side panels (4).JPG
454 hits | 87.42 KB | Posted: 12/2/10
Closeup of driver's side aft panel contoured to fit bedside.

DIY bedliner w drings and customized side panels (5).JPG
428 hits | 91.3 KB | Posted: 12/2/10
Closeup of passenger's side aft panel contoured to fit bedside.

Top on freshly wash&waxed (5).JPG
498 hits | 74.43 KB | Posted: 12/4/10
Changed the weatherstriping and put the top back on.

Top on freshly wash&waxed (6).JPG
471 hits | 79.88 KB | Posted: 12/4/10
Washed and waxed.

Top on freshly wash&waxed (4).JPG
502 hits | 82.43 KB | Posted: 12/4/10
I can see my reflection in the paint!

TFI with heatsinks.JPG
493 hits | 97.15 KB | Posted: 10/2/11
Tip I picked up from the boys on FSB!

TFI with heatsinks (1).JPG
533 hits | 101.28 KB | Posted: 10/2/11
The distributor mounted ignnition module tends to overheat causing intermittent shutdown till it coo...

TFI with heatsinks (2).JPG
471 hits | 88.75 KB | Posted: 10/2/11
The fix? Remove relocate and mount heatsinks/radiator fins to it and rewire.

TFI with heatsinks in airbox.JPG
503 hits | 95.22 KB | Posted: 10/2/11
I opted to mount inside the airbox where the coolest air under the hood will be found.

TFI with heatsinks in airbox (1).JPG
501 hits | 68.92 KB | Posted: 10/2/11
Being as how it is a 5.8 Liter it will be moving a lot of air over this guy.

TFI with heatsinks in airbox (2).JPG
463 hits | 83.6 KB | Posted: 10/2/11
Just need some longer screws and to exend the wiring harness.

TFI with heatsinks in airbox (3).JPG
541 hits | 55.7 KB | Posted: 10/2/11
Checking the fit beneath the filter. It's good!