SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Dark blue lifted Ford Bronco with chrome grille and off-road tires on driveway

“Eddie Bronco”1989 Ford Bronco

documented by B_Rent 35 photos documented since 1 years documented ♡ Follow this build

Photos

First time towing. Fully stock Bronco. Stopped at a gas station before heading to the drag strip with The Sil… 1989 Ford Bronco: The poor guy rode like that even with a light load in the back. 1989 Ford Bronco: Air shocks solved this problem. 1989 Ford Bronco: First time topless and with new tires/shocks. 1989 Ford Bronco: First time topless and with new tires/shocks. 1989 Ford Bronco: Custom BMW halo lights. Matches The Silver Hornet (GTO) 1989 Ford Bronco: Also clear tails 1989 Ford Bronco: Newly painted cab roof. Was faded and rusty. 1989 Ford Bronco: Newly painted cab roof. Was faded and rusty. 1989 Ford Bronco: Painted FG top white to match cab roof. 1989 Ford Bronco: Pretty good for a rattle can job 1989 Ford Bronco: Still brown inside. 1989 Ford Bronco: Hurculiner DIY bedliner. 1989 Ford Bronco: Replaced body mounting bolt access covers with d-rings. 1989 Ford Bronco: Not for heavy strapping down. Only held in place by 2 #8 screws. 1989 Ford Bronco: Not too bad for a roll on. 1989 Ford Bronco: New headliner and visors installed. The white marks are where I was thinking of mounting an Explorer OHC. 1989 Ford Bronco: Newly reupholstered seats installed. 1989 Ford Bronco: Newly reupholstered seats installed. 1989 Ford Bronco: I wanted to retain a factory appearance but remove the majority of excess plasic in the cargo area. 1989 Ford Bronco: So I measured and cut the plasic panels and support straps behind it. I then bent the panels at a 90* angle w… 1989 Ford Bronco: Finished. Getiing ready to put the top back on..... 1989 Ford Bronco: Closeup of tailgate jam area. Went a little nuts with the bedliner. But that paint is tough when it dries! 1989 Ford Bronco: Closeup of driver's side aft panel contoured to fit bedside. 1989 Ford Bronco: Closeup of passenger's side aft panel contoured to fit bedside. 1989 Ford Bronco: Washed and waxed. 1989 Ford Bronco: Changed the weatherstriping and put the top back on. 1989 Ford Bronco: I can see my reflection in the paint! 1989 Ford Bronco: Tip I picked up from the boys on FSB! 1989 Ford Bronco: The distributor mounted ignnition module tends to overheat causing intermittent shutdown till it cools off 1989 Ford Bronco: The fix? Remove relocate and mount heatsinks/radiator fins to it and rewire. 1989 Ford Bronco: I opted to mount inside the airbox where the coolest air under the hood will be found. 1989 Ford Bronco: Being as how it is a 5.8 Liter it will be moving a lot of air over this guy. 1989 Ford Bronco: Just need some longer screws and to exend the wiring harness. 1989 Ford Bronco: Checking the fit beneath the filter. It's good!

Technical reference · 1987-1991 Ford Bronco

Factory documentation members uploaded for this generation, sorted by how much of it there is.

The peanut gallery

No comments yet. Be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot. The owner approves it onto the record.