1980 Ford Bronco pictures, photos, videos, and sounds

REDBEAST9 > 1980 Ford Bronco

1980 Ford Bronco

Owner:	REDBEAST9 (All of this user's registries on SuperMotors)
From:	MERIDIANVILLE, AL, U.S.A. (Other registries in AL)
Year, Make, & Model:	1980 Ford Bronco (Other Ford Broncos)
Avatar:
Nickname:	The Beast
Mileage:
Engine:	Has a 335 series block. 400 with minor mods and 2150 carb polished and rejeted and spring loaded float for off road use.
Drivetrain:	The front is still TTB with limted slip carrier custom built with extra clutches for more engaement. Also has upgraded Dana 50 stub shaft for the use of larger stub shaft/ujoint. Trany is the NP435 6.69 to 1 ratio first gear. The T-case is a NP205 all gear. The rear is a ford 9 inch with 31 spline axles and full spool for a carrier. Also spots a 4" lift with extended radius arms and rides on 35x12.5 tires. Tires and lift were added Aug of 07.
Notes:	I have owned this Bronco since about 1992 and have beat the crap out of it. It has held up rather well but I have had to fix/rebuild many items that is to be expected. This Bronco is by no means stock and has been truly punished off road. I have owned several Full size Bronkos. One note, when this one was still stock height it sat about 3 inches higher off the ground than any other I have owned (81, 89, 93).
Last Updated:	7/28/2009
Hits:	10589

Album

Folder				Hits		Created	Updated
selonid wirring	3	0	0	1,657	0	11/1/06	10/1/07
The beast	33	0	0	8,936	0	10/1/07	6/1/08
Dana 44 high pinion (76)	6	0	0	1,462	0	10/21/07	10/21/07
TTB moved forward 1.5"	4	0	0	1,290	0	10/28/07	10/28/07
Locker ID??	7	0	0	2,311	0	11/8/07	11/8/07
FWC camper	35	0	0	10,683	0	5/5/08	8/9/08
6-01-08	53	0	0	12,635	0	6/1/08	6/1/08
warn 8274 winch	37	0	0	13,170	0	7/10/08	7/11/08
Winch bumper build	0	0	0	0	0	10/17/08	10/17/08
RITS 2009 ride	21	0	0	6,894	0	7/28/09	7/28/09

Newest Media Files

Mountainside Ride july 23-26 2009 010.jpg
401 hits | 61.77 KB | Posted: 7/28/09

Mountainside Ride july 23-26 2009 009.jpg
394 hits | 70.78 KB | Posted: 7/28/09

l_f2e8a44d52f144c7a5d7f0f95bce730c.jpg
478 hits | 68.16 KB | Posted: 7/28/09

l_c3666256312e43e39d4b6bf5256c86a0.jpg
370 hits | 93.64 KB | Posted: 7/28/09

l_d0ec5c02c57d404a96e7a3eb61457050.jpg
358 hits | 63.19 KB | Posted: 7/28/09

l_b90c71a26c614c86b95a27bf9312f71c.jpg
382 hits | 61.41 KB | Posted: 7/28/09

l_aecb7e40635346e38fcc2f8d50fcc188.jpg
418 hits | 61.46 KB | Posted: 7/28/09

l_a3c0472313464cb3b9fab98380bb7ffe.jpg
410 hits | 53.3 KB | Posted: 7/28/09

l_15707699baa34c7382b5156523b2134a.jpg
414 hits | 48.76 KB | Posted: 7/28/09
Gawkers!!

Most Viewed Files

P7090008.JPG
1117 hits | 51.6 KB | Posted: 7/10/08
Free spool clutch

P8090028.JPG
820 hits | 82.7 KB | Posted: 8/9/08
The camper is a Four Wheel Pop-Up, model is the Grandby and its a early 80's model. The truck is a Ford F250, 1995 model with a 460.

bronco 001.jpg
574 hits | 86.32 KB | Posted: 11/1/06
wiring

bronco 002.jpg
568 hits | 82.24 KB | Posted: 11/1/06
wiring

P7100020.JPG
531 hits | 56.01 KB | Posted: 7/11/08
Still have to put the motor housing on but first I add oil. It calls for 6oz of non-det 30 weight. But I put 12oz. Anyone who has evered owned one of these winches know they will leak from time to time.

bronco 003.jpg
515 hits | 79.47 KB | Posted: 11/1/06
wiring

P7080001.JPG
492 hits | 69.74 KB | Posted: 7/10/08
1979 Warn M8274 winch

l_f2e8a44d52f144c7a5d7f0f95bce730c.jpg
478 hits | 68.16 KB | Posted: 7/28/09

P8090024.JPG
477 hits | 87.93 KB | Posted: 8/9/08

Maintenance & Modification Logs

This user hasn't added any log entries, yet.