1999 Ford Crown Victoria E-Brake Shoes pictures, videos, and sounds


Hits: 3881 Size: 59.5 KB Posted: 12/5/06 My e-brake pedal had NO resistance, and when I pulled the rear rotors, I found why: the friction mat...	Hits: 3253 Size: 55.85 KB Posted: 12/5/06 After buying new shoes (NAPA ~$25/set of 4), removing the tire, caliper, & rotor, the next step is t...	Hits: 3017 Size: 54.42 KB Posted: 12/5/06 After removing all other parts, pry the bottom of the shoe nearest the caliper toward the caliper ar...	Hits: 3116 Size: 49.53 KB Posted: 12/5/06 While the brakes & hardware are completely out of the way, clean any steel filings from the ABS sens...	Hits: 2876 Size: 61.46 KB Posted: 12/5/06 Transfer the lower spring to the new shoes & replace them in the reverse order. Set the bottom of t...
Hits: 2699 Size: 57.42 KB Posted: 12/5/06 Before replacing the rotors, make sure they're clean & free of rust on the friction surfaces. If ne...	Hits: 2832 Size: 82.34 KB Posted: 12/5/06 One of my studs had been broken somehow, but enough thread was left for the nut to be installed effe...	Hits: 3152 Size: 48.07 KB Posted: 12/5/06 Rotate the hub so there's ample clearance behind the stud to be removed, then drive it inward with a...	Hits: 9450 Size: 76.63 KB Posted: 3/11/07 E-brake specs. [url=http://www.supermotors.net/registry/media/187603][img]http://www.supermotors....