swaybar mount.jpg
670 hits | 105.46 KB | Posted: 11/1/06
This is the drop for the swaybar. this keeps all aligned correctly after the lift.

dogbone.jpg
623 hits | 95.37 KB | Posted: 11/7/06
i wanted to replace the worn out rubber bushings so out the dog bones came and i drilled out the old...

dogbone2.jpg
627 hits | 99.44 KB | Posted: 11/7/06
I drilled out all the ruber bushings on both swaybar links.

swaymount2.jpg
613 hits | 82.97 KB | Posted: 11/7/06
Here is the drop mount painted and ready for re-install.

dropsinstalled.jpg
571 hits | 92.87 KB | Posted: 10/27/06
I did not like the way the swaybar was hanging out in the front and it was binding some. so most say...

swaymount.jpg
595 hits | 93.82 KB | Posted: 11/7/06
Here is the 2 " drop mount for the swaybar. this was part of the the 4" lift kit that was already in...

sway2.jpg
546 hits | 102.64 KB | Posted: 11/7/06
here is the mount painted and installed

sway3.jpg
706 hits | 103.84 KB | Posted: 11/7/06
here are the dog bones installed. this did tighen the front end alittle.

swaybar.jpg
595 hits | 109.78 KB | Posted: 11/7/06
here it is all done.

old-new-dog-bones.jpg
690 hits | 38.71 KB | Posted: 10/27/06
On the right is the stock bronco dog bones. they would be in the way of a knuckle under that i plan ...

pass-side-link.jpg
524 hits | 67.4 KB | Posted: 10/27/06
I swapped the rubber bushings for the polly ones i put in the stock dog bones. i then went to OSH an...

driver-swaybar-link.jpg
600 hits | 83.07 KB | Posted: 10/27/06
Here is the drivers side setup just like the pass side. this was all done for $10

new-swaybar-mount.jpg
568 hits | 72.69 KB | Posted: 10/27/06
since i had longer links i wanted to remount the swaybar front. i was able to toss the 2" drop mount...