IMG_0087.JPG
622 hits | 53.64 KB | Posted: 8/10/07
There's the old uber-kinked 2 " Lincoln replacement tailpipe. Next to it is the Impala SS mandrel be...

IMG_0101.JPG
534 hits | 58.8 KB | Posted: 8/10/07
To begin, after unbolting the old connector pipe, we bolted on the 3" to 2 1/2" reducer flange loose...

IMG_0093.JPG
577 hits | 74.25 KB | Posted: 8/10/07
After hanging the new Dynomax Impala SS tailpipe loosely over the axle, my pipe bending buddy decide...

IMG_0112.JPG
533 hits | 72.16 KB | Posted: 8/10/07
He's one smart cookie on exhausts and an expert with a torch. In no time flat he had it bent the way...

IMG_0122.JPG
583 hits | 58.58 KB | Posted: 8/10/07
Wish I had more lighting, but squint away and you can see how well the hanger/clamp positions the 2...

IMG_0109.JPG
503 hits | 51.97 KB | Posted: 8/10/07
He bent a bit of 2 1/2" pipe and slipped it into the Hooker muffler.

IMG_0113.JPG
591 hits | 54.4 KB | Posted: 8/10/07
Keep in mind these bends are not mandrel bent, but he managed to keep everything flowing nicely and ...

IMG_0114.JPG
547 hits | 46.73 KB | Posted: 8/10/07
Once the muffler was clamped in and the tailpipe was positioned where we wanted it, he welded up the...

IMG_0118.JPG
600 hits | 54.7 KB | Posted: 8/10/07
Couldn't resist my resonator style 3" turndown. He liked it too and welded it up to a piece of 2 1/2...

IMG_0123.JPG
615 hits | 74.55 KB | Posted: 8/10/07
Here it is in place. Loved that uber-handy hanger clamp he produced for the rear part of the tailpip...