File 11 of 12
Prev | Next

Share This
Url
Tag
Img
Thumb

powersteering9.jpg there are 2 nuts on the back of the pump that need to come off or do like me remove the bracket===2 exhaust nuts and an alt bolt.  then put the mounting bracket on the new pump (i put the pressure line on at the same time--less fighting) and install the pump. then install the pulley and then i put the return linee in a 2 litter bottle and filled the new pump to the top and ran the motor for a few seconds and repeated the fill run a few times and then instaled the return line and checked the level and topped off as needed. this was an easy job and the noises and lack of power steering is gone....
powersteering9.jpg | Hits: 505 | Posted on: 1/4/08 | View original size (147.53 KB)

there are 2 nuts on the back of the pump that need to come off or do like me remove the bracket===2 exhaust nuts and an alt bolt. then put the mounting bracket on the new pump (i put the pressure line on at the same time--less fighting) and install the pump. then install the pulley and then i put the return linee in a 2 litter bottle and filled the new pump to the top and ran the motor for a few seconds and repeated the fill run a few times and then instaled the return line and checked the level and topped off as needed. this was an easy job and the noises and lack of power steering is gone....
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog