jicki mojo
 |
|
• dallas, TX, USA |
|
• Registered on 11/26/2004 |
|
• 28 posts |
|
|
|
 Posted:12/8/2004 13:45 |
|
|
Th 5in superlift block is to bring the back up to the front without it the truck sat nose high![/quote]
My 03 sits level or higher in the back end. Has your 00 always rode nose high?
[/quote]
Stock it rode nose low!
00 4x4 psd ex
4in procomp lift
315 75 r16 procomp all terrains
The Green Machine |
|
Gen-X
 |
|
• Toronto, XX, Canada |
|
• Registered on 1/19/2004 |
|
• 344 posts |
• 1
|
|
|
Posted:12/8/2004 14:39 |
|
|
Understood
Cheers
 |
|
CHPMustang
 |
|
• Plano, TX, USA |
|
• Registered on 7/24/2002 |
|
• 1,798 posts |
• 1
|
|
|
Posted:12/8/2004 16:20 |
|
|
Remember Billy,"Nose High" is California style and I'm sure most would not have it that way unless there was a bowtie was on the grille 
Bill
2002 Excursion XLT-P 4x4 7.3L Powerstroke Diesel
|
|
jicki mojo
|
|
• dallas, TX, USA |
|
• Registered on 11/26/2004 |
|
• 28 posts |
|
|
|
|
Posted:12/8/2004 17:12 |
|
|
| Quote: | | Remember Billy,"Nose High" is California style and I'm sure most would not have it that way unless there was a bowtie was on the grille |
BWAAAHHHAAAHAA cough cough BWAAAAHHAAAA
00 4x4 psd ex
4in procomp lift
315 75 r16 procomp all terrains
The Green Machine |
|
dnevins
 |
• Subscriber since 12/29/2009 |
|
• San Diego, CA, USA |
|
• Registered on 12/28/2009 |
|
• 340 posts |
|
|
|
|
|
For anyone landing here with the same tire question, this thread worked out a few things worth pulling together.
Members ran 305 and 315 wide tires on the factory 16 inch wheels. A 315/75R16 is about 34.6 inches tall, so that is the usual "35" on a stock rim. They can wear oddly on a 7 inch wide wheel, so keep an eye on the pressure.
Watch the kit names. An Excursion sits about 2 inches lower than a same year Super Duty, so a 4 inch Super Duty kit lifts an Excursion roughly 6 inches, and the part numbers are the same. One member said the 4 inch Excursion kit by itself only clears 33s.
Billy's finished truck used ProComp's 4 inch Excursion kit up front with Superlift 5 inch rear blocks, and it sat level. Another owner with the ProComp kit needed about 1.5 inches more block in the rear to level it.
Dana
https://partslogic.com |
|