EricInWI
 |
|
• Kenosha, WI, USA |
|
• Registered on 9/18/2004 |
|
• 7 posts |
|
|
|
 Posted:4/4/2005 21:17 |
|
|
Can anyone recommend an upgrade for the stock serpentine belt on the V10, I have a 2004 with the 6.8 and the belt squeals like a stuck pig when shifting at ....well, ...higher RPMS.... 
I had heard my buddy speak highly about the Gatorback from Goodyear on his little F150 Triton, but can't get a part number for the 2004 V10. Anyone have any suggestions? The local Goodyear Svc Mgr was less helpful than an Autozone employee at closing time 
Thanks in advance!
Eric |
|
CHPMustang
 |
|
• Plano, TX, USA |
|
• Registered on 7/24/2002 |
|
• 1,800 posts |
• 1
|
|
|
Posted:4/4/2005 21:45 |
|
|
Eric I pulled up the part number for the Goodyear Poly-V belt but it is for a 2003 not sure if it'll be the same for 2004 models.
#4060990 (Poly-V, w/AC)
Some have used belt dressing but I've found in some cases to make it worse and not fix the problem,I'd suggest a new belt altogether.
I don't get my head under the hoods of many V10's but I'd check the idler pulley/tensioner to be sure it's not cocked or any of the other belt driven components.
Bill
Bill
2002 Excursion XLT-P 4x4 7.3L Powerstroke Diesel
|
|
birdman127
 |
|
• baltimore, MD, USA |
|
• Registered on 10/13/2002 |
|
• 581 posts |
• 1
|
|
|
Posted:4/6/2005 06:42 |
|
|
I also just replaced my belt with a Gatorback belt before leaving for Florida for two weeks and no noise or problems. It was a easy job with a tool from AutoZone in there parking lot.
Moderator
Scott
2000 ltd 6.8 V10*4.30LS*
Lots of mods
check my gallery
|
|
CHPMustang
|
|
• Plano, TX, USA |
|
• Registered on 7/24/2002 |
|
• 1,800 posts |
• 1
|
|
|
Posted:4/6/2005 10:22 |
|
|
Scott what tool is needed to crank on the tensioner to get the belt on and off? I know on the 7.3L's we use a 1/2" drive breaker bar.
Bill
Bill
2002 Excursion XLT-P 4x4 7.3L Powerstroke Diesel
|
|
JohnBoy
 |
|
• DFW, TX, USA |
|
• Registered on 9/3/2002 |
|
• 972 posts |
• 2
|
|
|
Posted:4/6/2005 10:30 |
|
|
CHP, you recommended belt dressing.....
remember the word moderation if you use that stuff 
let's say a "buddy" years ago was embarrased by the squeal in his NICE Jeep 5.9 Limited...
let's say he tried some belt dressing and used the ole logic...
"If a little does good, a lot will do betta"
let's say that SOME slip is preferred...
cuz the belt SNAPPED about two blocks down the road because of TOO much grip 
2005 6.0L 4x4 Eddie Bauer Ex
2003 6.0L 4x4 Limited Ex - traded in (BooHoo )
"The Republicans should back off and let men marry men, women marry women, and legalize abortion. In three generations there would be no Democrats." |
|
CHPMustang
|
|
• Plano, TX, USA |
|
• Registered on 7/24/2002 |
|
• 1,800 posts |
• 1
|
|
|
Posted:4/6/2005 10:55 |
|
|
Yeah when I see the cans of belt dressing in the auto parts store it sorta makes me cringe but it is a quick band aid but not a long term fix in any way so yeah use that stuff in moderation.
Too much slip and the belt/s will glaze from the heat then crack then snap,proper tension is the best measure for long life on belts. 
Bill
Bill
2002 Excursion XLT-P 4x4 7.3L Powerstroke Diesel
|
|
EricInWI
|
|
• Kenosha, WI, USA |
|
• Registered on 9/18/2004 |
|
• 7 posts |
|
|
|
|
Posted:4/6/2005 16:10 |
|
|
CHP, and all,
The Goodyear part number 4060990 is for the six rib 99" long Gatorback. It is the same for the 2004, and OH MY FREAKIN GOD WHAT A DIFFERENCE!!!!!!!! 
Took about 10 minutes to install.. had to find something to stand on  No squeal during upshifts, and I swear it is quieter at idle. $29 bucks well spent, I even got one for the wife's explorer.
Thanks for all the input! |
|
CHPMustang
|
|
• Plano, TX, USA |
|
• Registered on 7/24/2002 |
|
• 1,800 posts |
• 1
|
|
|
Posted:4/6/2005 16:21 |
|
|
Hey Eric,where'd you pick up the new belt at? 
Glad to know the problem is resolved 
Bill
Bill
2002 Excursion XLT-P 4x4 7.3L Powerstroke Diesel
|
|
EricInWI
|
|
• Kenosha, WI, USA |
|
• Registered on 9/18/2004 |
|
• 7 posts |
|
|
|
|
Posted:4/6/2005 17:32 |
|
|
|
Autozone, they had the 99 in stock for the Ex, but had to special order the Explorer belt. Goodyear wanted $54 for special order. |
|
CHPMustang
|
|
• Plano, TX, USA |
|
• Registered on 7/24/2002 |
|
• 1,800 posts |
• 1
|
|
|
Posted:4/6/2005 18:08 |
|
|
Goodyear direct sure is abit more than the Autozone route 
Thanks for the comeback Eric
Bill
Bill
2002 Excursion XLT-P 4x4 7.3L Powerstroke Diesel
|
|