|
|
Decided im going to do a 'revision' of sorts to the truck. i decided i do want the truck to have 4x4 again, make more power, and redo all the wiring to be more reliable. im going to do it all in steps because it is my daily driver still.
in order to do a 4x4 swap i have to get rid of my long tube headers which completly blocks the front driveshaft. however i am using GT40P cylinder heads which have a special spark plug angle making many headers not fit correctly. i decided instead of struggling with the plug angle issue, i would go ahead and replace the cylinder heads.
so first step of this revision is going to be to swap the GT40P cylinder heads out and do all new exhaust. i am using Edelbrock E-street 5023 aluminum heads. the heads i already replaced the valve springs for K-Motion K-750 for my roller cam. i am using Scorpion 1.72 ratio roller rockers in order to get some extra from my Comp 35-512-8 cam which should give me 0.516" lift instead of the 0.480" i originally had.
|
