1979 Ranchero GT 351M Auto CA emissions Vacuum Help

Can Anyone please help me reroute all my Vacuum lines to
>Carburetor
>Manifold
>Ported switches
IVE GOOGLED READ LOTS FORUMS, Called Dealers(suck) and hit up Libraries! guess ill have to purchase some Factory literature soon but meanwhile if I can get a damn Drawing in crayon of hose placement
CLOSEST calibration found is 9-59J-RON Date: 1/79 close but purge CV on passenger side?

Our 1977 to 1979 Ranchero vacuum page has a scanned Ford routing diagram for the 351M, for calibrations 9-71J-R10 and 7-72J-R11. To be plain about it, that is not the 9-59J you found, and California cars often differ, so treat it as a close guide rather than an exact match. It shows how Ford laid out the carburetor, manifold and ported vacuum switch connections on this engine, which is most of the battle when you are starting from a tangle of loose hoses.

https://www.supermotors.net/reference/ford/ranchero/1977-1979/vacuum-routing

Two things help pin down your exact setup. The calibration code is on a label on the engine (usually on a valve cover or the front of the block area), and the underhood emissions decal on many cars of this era carries its own hose diagram if it is still there. If you can post the calibration from the label, it is much easier to say how close the diagram above is.

Dana