May 28, 2014 at 12:02 PM
I am thinking of swapping rear ends in my 2003 CVPI. Do I need an 03 CVPI rear end or can I use one from a Mustang or F150? Do I need the same year or can I use any 03 and newer? I know mine is a 28 spline model.
Home/
Forums/
Car and Truck Make and Model Specific/
Crown Victoria, Marauder, Marquis/
Rear End Swap 2003 CVPI
Crown Victoria, Marauder, Marquis
Rear End Swap 2003 CVPI
2 posts
2 contributors
1,298 views
May 29, 2014 at 2:30 PM
For a carrier, you can use ANY other 8.8 that is 28 spline.
For an entire rear end, you can use any Crown Victoria, Grand Marquis, Marauder or Town Car 2003+.
If you get one that is 2006 or newer, it will have 31 spline axles, upgrade but not really needed unless you're making power. If you get a 2003 then make sure the axle shafts are ok before you put it in.
For an entire rear end, you can use any Crown Victoria, Grand Marquis, Marauder or Town Car 2003+.
If you get one that is 2006 or newer, it will have 31 spline axles, upgrade but not really needed unless you're making power. If you get a 2003 then make sure the axle shafts are ok before you put it in.
Know the answer? Join free to reply. This community has answered Ford questions for 25 years, and threads like this one stay up to help the next owner.
Join free