|
Hits: 1943 Size: 52.82 KB Posted: 12/14/06 I finally got it back, so I can finish it up (hopefully!). Another guy did a lot of work on it in B... | Hits: 2152 Size: 83.11 KB Posted: 12/30/06 Job 1 was to get the dash off & fix the non-functional gauges & defrost, install the missing glove b... | Hits: 1539 Size: 69.45 KB Posted: 12/30/06 After those fixes, I also have to sort out this MESS. The guy who installed the old dash (I was pla... | Hits: 1518 Size: 84.39 KB Posted: 12/30/06 The brake pedal is WAAAY to high, so I'm going to rethread its pushrod & adjust its position. One o... | Hits: 1634 Size: 73.94 KB Posted: 12/30/06 The cruise module is in the lower L & the RKE is in the upper R. I managed to cross 2 sets of wires... |
Hits: 1503 Size: 78.23 KB Posted: 12/30/06 Those red hoses... They're driving me NUTS!!! I'm putting some split-loom over them in here. | Hits: 1693 Size: 100.42 KB Posted: 12/30/06 This is actually more organized than it looks, and most of the '88 F150 circuits are still there doi... | Hits: 1595 Size: 87.01 KB Posted: 12/30/06 The big red connector is for the interval wipers (module is at the top). Just to its R, the white p... | Hits: 2280 Size: 86.65 KB Posted: 12/30/06 The Pu/Wh wires are for the e-brake pedal switch (when I figure out how to mount one). The inertia ... | Hits: 1549 Size: 94.08 KB Posted: 12/30/06 I've made the center dash brace my main ground, but there are other redundant grounds. The big harn... |
Hits: 3015 Size: 95.01 KB Posted: 12/30/06 The plate for the driver's door switch fits behind the original hole without change. The 2 R wires ... | Hits: 2194 Size: 82.37 KB Posted: 9/10/10 The '88 truck passenger courtesy light switch is simply screwed into a hole drilled in the door jamb... | Hits: 1807 Size: 66.22 KB Posted: 12/30/06 It's not totally finished, but it's getting close. I forgot to install the glove box, so it's comin... | Hits: 1956 Size: 62.71 KB Posted: 12/30/06 This angle doesn't show those %@#*(& red hoses as much, but it does show the gigantic patch in the h... | Hits: 1470 Size: 81.08 KB Posted: 2/7/07 After the heater core blew out, this is what came out of the radiator. For the reason it happened, ... |
Hits: 1549 Size: 70.87 KB Posted: 2/7/07 This was after the 2nd rinse - it smells like a wet ashtray. For the reason it happened, read [url=... | Hits: 1723 Size: 66.97 KB Posted: 3/8/07 We decided that an original badge wasn't appropriate, considering all the modifications, and since w... | Hits: 1838 Size: 47.33 KB Posted: 3/3/07 The original rubber bushing cracked & fell out while driving, which normally destroys the transmissi... | Hits: 1609 Size: 70.34 KB Posted: 3/25/07 This trans only has a few hundred miles on it in the past 6 years, but one of them was with the TV c... | Hits: 2673 Size: 80.31 KB Posted: 4/21/07 Just a current photo on a sunny day. |
Hits: 38281 Size: 79.09 KB Posted: 4/21/07 This is a common problem in all pre-'92 EFI F-series & Broncos. These Ford-style relays (BROWN sock... | Hits: 8231 Size: 81.25 KB Posted: 4/21/07 Working on ONE relay at a time, remove the terminals from the stock connector & discard it. I colle... | Hits: 8337 Size: 79.88 KB Posted: 4/21/07 Being careful to connect the wires to the proper terminals (using the list below), securely connect ... | Hits: 7446 Size: 76.6 KB Posted: 4/21/07 Now the truck will be MUCH more reliable, and can use the cheaper, heavier-duty, more common ISO rel... | Hits: 3825 Size: 89.2 KB Posted: 8/22/10 There was a rain leak coming off the EEC, so I pulled the vent blockoff to reseal it, and pulled the... |
Hits: 3423 Size: 65.39 KB Posted: 5/17/07 I'm getting progressively LESS happy with Jeff's Bronco Graveyard. Not only was the rear tank molde... | Hits: 2556 Size: 81.09 KB Posted: 5/3/09 After fighting the fuel system for a few weeks, I realized that the problem was the aftermarket sole... | Hits: 8691 Size: 61.39 KB Posted: 12/25/10 Early Bronco Alternator Wiring (simplified)
http://classicbroncos.com/forums/showthread.php?t=176046... | Hits: 8038 Size: 103.74 KB Posted: 9/20/07 This is going to replace the crappy '88 2G alternator. The 130A 3G alternators are easily identifia... | Hits: 2929 Size: 68.98 KB Posted: 9/19/07 The old '88 alternator died, so instead of replacing it, it's getting a 3G conversion. The harness ... |
Hits: 2288 Size: 66.25 KB Posted: 9/19/07 The top bolt eye hits the case.
GO TO THE NEXT PIC. | Hits: 2199 Size: 57.91 KB Posted: 9/19/07 The case hits this rib of the bracket, preventing the top bolt from aligning. The scratch is where ... | Hits: 2029 Size: 61.61 KB Posted: 9/19/07 A few seconds with the 4 1/2" grinder solves this problem.
GO TO THE NEXT PIC. | Hits: 1996 Size: 59.13 KB Posted: 9/19/07 A few more seconds and this will be fixed.
GO TO THE NEXT PIC. | Hits: 2016 Size: 85.2 KB Posted: 9/19/07 To solve this, I drilled the alternator boss to 7/16" (~11mm) and tapped it to 1/2"-13 for... |
Hits: 1975 Size: 63.66 KB Posted: 11/11/07 The other guy who worked on it installed an aftermarket antenna switch that couldn't be seen, wasn't... | Hits: 1895 Size: 65.59 KB Posted: 11/11/07 We're not happy with the fuel tank select switch mounting screws or its location, or the A/C control... | Hits: 3877 Size: 60.94 KB Posted: 12/29/07 The passenger floorboard got uncomfortably hot this past summer, making the A/C nearly useless. So ... | Hits: 2166 Size: 76.44 KB Posted: 12/29/07 To keep even more heat out, all the exhaust pipes near the body are now wrapped. This stuff smokes ... | Hits: 2159 Size: 69.52 KB Posted: 12/29/07 To keep even more heat out, all the exhaust pipes near the body are now wrapped. This stuff smokes ... |
Hits: 2013 Size: 70.56 KB Posted: 12/29/07 To keep even more heat out, all the exhaust pipes near the body are now wrapped. This stuff smokes &... | Hits: 2184 Size: 72.83 KB Posted: 12/29/07 To keep even more heat out, all the exhaust pipes near the body are now wrapped. This stuff smokes &... | Hits: 1627 Size: 60.4 KB Posted: 12/30/06 The wiring coming up thru the w/s frame is well out of the way, but I forgot to pull a switched powe... | Hits: 1836 Size: 53.87 KB Posted: 12/30/06 The shoulder belts look & work great. One day, I'll build a headliner & install a nicer dome lamp. | Hits: 1657 Size: 49.1 KB Posted: 12/30/06 The rear defroster is now fully wired up, and it doesn't interfere with the liftgate at all. Just i... |
Hits: 5646 Size: 72.85 KB Posted: 12/29/07 To kill off some of the drone from the Flows, there's about 40 lbs of Dynamat Extreme going in. Eve... | Hits: 3138 Size: 67.38 KB Posted: 1/6/08 The mat is done up to the front seats, and that might be as far as it goes. No noise will come up t... | Hits: 4317 Size: 61.72 KB Posted: 1/6/08 The camper shell is matted, including around the side windows. The difference in noise is amazing -... | Hits: 2141 Size: 67.79 KB Posted: 2/3/08 The wiring above the windshield for the dome lamps & rear defroster now runs inside the wiper cover ... | Hits: 2234 Size: 30.86 KB Posted: 11/11/07 The headliner is painted & installed. This is an aftermarket one, and its quality leaves something ... |
Hits: 1946 Size: 30.73 KB Posted: 11/11/07 The rear section fits well. | Hits: 1906 Size: 26.82 KB Posted: 11/11/07 The front section was more difficult to align, especially since the wiper motor is on the wrong type... | Hits: 2200 Size: 30.49 KB Posted: 12/29/07 After reverting to the factory wiper motor bracket (the previous owner installed a soft-top style), ... | Hits: 2156 Size: 42.56 KB Posted: 2/3/08 The dome light wiring isn't connected yet, but the wiper cover & visors had to be test-fitted so the... | Hits: 3378 Size: 59.08 KB Posted: 6/1/08 The front as of the upload date, including tilt/cruise column, A/C, autodimming compass temperature ... |
Hits: 4063 Size: 75.51 KB Posted: 4/20/08 Bring the bright - 3 domes & 4 map lights, plus a low cargo light on the L bedwall. There's a layer... | Hits: 2732 Size: 52.47 KB Posted: 6/1/08 The back as of today. Next stop - CARPET and tint.
The rear seat base is an abomination, which is ... | Hits: 2208 Size: 46.03 KB Posted: 9/16/09 Dash Extension
Frank didn't want to see the A/C hoses & wiring under the dash, so I slapped this ... | Hits: 1673 Size: 62.91 KB Posted: 11/14/09 The BC Broncos liftgate strut kit, supplied thru BroncoHut. It's straightforward to install, but dr... | Hits: 1986 Size: 53.76 KB Posted: 4/19/08 These nerf bars were shipped as bare steel. Some minor welding spatter had to be cleaned, and drain ... |
Hits: 2013 Size: 89.55 KB Posted: 4/17/08 Oh my sore thumbs... | Hits: 1518 Size: 61.48 KB Posted: 4/17/08 Oh my sore thumbs... | Hits: 1494 Size: 91.93 KB Posted: 4/17/08 Oh my sore thumbs... | Hits: 1472 Size: 92.07 KB Posted: 4/17/08 Oh my sore thumbs... | Hits: 1449 Size: 92.33 KB Posted: 9/10/10 The coil is still on the '88 truck bracket, but the bracket has been bent to fit here. |
Hits: 1490 Size: 45.42 KB Posted: 4/30/09 The original has been leaking slightly for a few months, and it blew out the same day this arrived. ... | Hits: 1779 Size: 80.31 KB Posted: 4/30/09 I put a light coat of flat black on the front face of everything so it wouldn't be so noticeable thr... | Hits: 1612 Size: 92.02 KB Posted: 4/30/09 The engine bay, sans radiator/condenser/trans cooler.
I still haven't figured out why the guy in BR... | Hits: 1711 Size: 74.15 KB Posted: 4/30/09 The new coolant & wiper reservoirs, and the back of the condenser with the new ATF cooler installed.... | Hits: 1424 Size: 65.5 KB Posted: 4/30/09 Even after a little filing to remove the burrs from the corners of the blocks, the original mounts s... |
Hits: 1704 Size: 77.61 KB Posted: 5/8/09 After a lot of searching, I learned that the best hoses for this combination are for an '89 Mustang ... | Hits: 1710 Size: 61.18 KB Posted: 5/8/09 There's NO extra room. I even had to remove part of the fan spacer to get THIS much clearance. But... | Hits: 1581 Size: 71.6 KB Posted: 5/9/09 The rear brakes were sticky, so we replaced everything except the slaves, e-brake levers, & equalize... | Hits: 1348 Size: 65.68 KB Posted: 5/9/09 The trans dipstick O-rings were leaking, so they've been replaced. It was surprisingly difficult be... | Hits: 4638 Size: 57.92 KB Posted: 7/17/09 I ordered some black vinyl & made wheelwell liners to hide the body, and to reduce noise & rust from... |
Hits: 1726 Size: 101.75 KB Posted: 8/27/10 The hood got the same treatement as the liftgate.
[url=http://www.supermotors.net/registry/media/76... | | | | |