How-to
1990 Lincoln Town Car PCV Valve and Grommet Replacement
The PCV valve on a 1990 Lincoln Town Car was replaced along with its grommet and the oil breather strainer that sits beneath it. The old grommet pulled out with the valve, so it was renewed at the same time.
-
Step 1
Locate the PCV valve behind and below the last port on the intake, with its hose still attached.
-
Step 2
Pull the hose off the valve. The owner reports that the grommet came out along with the PCV valve, showing how old and brittle it had become.
-
Step 3
Lift out the oil breather filter, which sits under the PCV grommet.
-
Step 4
Fit the new oil strainer first, setting it loosely into place.
-
Step 5
Push the strainer gently down until it seats in its bore.
-
Step 6
Install the new PCV valve grommet and leave it ready to receive the valve.
-
Step 7
Insert the new PCV valve into the grommet and push the hose back on.
-
Step 8
Check the port on the intake where the hose from the PCV valve plugs in.
Some product links go to the supplier the owner bought from. SuperMotors does not earn a commission today; if that changes, this line will say so and creators will be paid from it.