IMG_0102.JPG
671 hits | 50.17 KB | Posted: 10/6/08
Guess that's why it wasn't working. The actuator was laying in the bottom of the door, having fallen...

IMG_0104.JPG
586 hits | 51.77 KB | Posted: 10/6/08
You can see one side of the "snout" of the housing was partially broken allowing the hook's gear tee...

IMG_0105.JPG
575 hits | 35.49 KB | Posted: 10/6/08
Peened together with heat at the factory and supposedly a sealed, throw away unit.

IMG_0109.JPG
842 hits | 47.33 KB | Posted: 10/6/08
Unserviceable my @$$. If you think I'm shelling out good coin, when there's little else wrong with t...

IMG_0110.JPG
657 hits | 78.06 KB | Posted: 10/6/08
Four eyelets(that should have had removeable screws) drilled out and the sides of the case separated...

IMG_0114.JPG
657 hits | 57.77 KB | Posted: 10/6/08
I knew it worked fine as I was listening to it jump around in the doors since last Fall. I reinstall...

IMG_0118.JPG
553 hits | 25.5 KB | Posted: 10/6/08
I used a much longer 1/4-UNC-20 bolt so it wouldn't fall out of the actuator cradle while I fiddled ...