SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Toyota/ Hilux/ 1992 Hilux/ bushing install supermotors.net/registry/9949/29635

Album section

bushing install

From 1992 Toyota Hilux, documented by Josh T.

14 photos
← Back to this vehicle
1992 Toyota Hilux - Close-up view of a vehicle's undercarriage, focusing on suspension work with a socket wrench. 1992 Toyota Hilux - remove the hub screws 1992 Toyota Hilux - remove the hub with a light tap of a rubber mallet 1992 Toyota Hilux - cover bearings with a shop rag i had just repacked my bearings less than a week before so I knew the grease was still good 1992 Toyota Hilux - remove the hub and rotor assembly brakes and then you are to this stage 1992 Toyota Hilux - use a pickle fork and whack the ball joints loose 1992 Toyota Hilux - remove the control arms notice the wear and tear 1992 Toyota Hilux - press the bushings out and now the restoration process mine were shot but a simple strong fix is ahead 1992 Toyota Hilux - you will need the following items black RTV, and silver spraypaint and a steady hand. I chose black rtv but other colors will work, high te… 1992 Toyota Hilux - goop on the rtv generously and fill the inside as well, you do not want any air gaps where the bushing would work itself loose again 1992 Toyota Hilux - spread the RTV evenly taking your time and evening it out as when it finally sets it will be rock hard, or so I am told. new bushings cost… 1992 Toyota Hilux - repeat this RTV application to all bushings and then I painted mine for good looks, I hate doing lots of work with no show for the ladies 1992 Toyota Hilux - i was very careful with my overspray and placed grade 8 washers while the RTV was still setting to give it a clean look, taped off teh bush… 1992 Toyota Hilux - everything back together with all grade 8 hardware with no shortcuts it looks great and my friend was right it rides great on and off road