|
|
cimg0487.jpg | Hits: 250 | Posted on: 3/21/09
| View Low-Res
Together with the chevy 1/2t backing plate. Early drum spindle and late disc and hub. If usinf the warn style hub lock (i.e. warn, MM, superwinch etc.) you will need to leave the small axle snap ring off. If using the original dana/spicer hub locks you will need to use a bolt and washer in the end of the axle. If you position the backing plate this way the brake hose is close to the upper ball joint nut ford drum spindle with chevy 1/2t backing plate. If you position the backing plate this way the brake hose is close to the upper ball joint nut
|
