PRESS 1 49 H010 401 00.7 mm (00327 in) 73 OIL PUMP D2 Side clearance: 0.030.09mm {0301200035 in) Maximum: 0.13mm {0.0051 in} Assembly Note Inner and outer rotor 1. Apply clean engine oil to the friction surface of the pump body and the rotors. 2. Install the inner and outer rotors into the oil pump body with the marks aligned as shown. Pump cover 1. Install the pump cover. Tightening torque: 5.9-8.8 NAm {6090 kgf-cm, 5378 in-lbf} 2. Verify that the oil pump rotates smoothly when turned by hand. Oil seal 1. Apply clean engine oil to the new oil seal. 2. Install the oil seal into the oil pump body by hand. 3. Press the oil seal into the oil pump body by using the SST. D21 3