image-2014-02-19-19-30-05.jpg 360 hits | 64.73 KB | Posted: 2014-02-20 figure out the leanth of the chain and grind down the pins and remove the links then simply put it all back together and use the master link to put the chain back together ... (Posted in: PICS)
image-2014-02-19-19-30-11.jpg 372 hits | 70.52 KB | Posted: 2014-02-20 put the axle back into place and setup your new chain ... (Posted in: PICS)
image-2014-02-19-19-29-59.jpg 371 hits | 73.29 KB | Posted: 2014-02-20 take the old spocket off and put the new one on and make sure to use extra long bolts so you can put lock nuts on the other side and then reassemble ... (Posted in: PICS)
image-2014-02-19-19-29-50.jpg 365 hits | 73.28 KB | Posted: 2014-02-20 then take the big nuts off and the piece that holds the sprocket on will slide off... (Posted in: PICS)
image-2014-02-19-19-29-41.jpg 353 hits | 59.66 KB | Posted: 2014-02-20 then with these tools tap the inner ring of the bearing and it will slide off ... (Posted in: PICS)
IMG_20140219_201627.jpg 351 hits | 66.58 KB | Posted: 2014-02-20 when it comes out it looks like this, take off this nut ... (Posted in: PICS)
IMG_20140219_200845.jpg 339 hits | 80.54 KB | Posted: 2014-02-20 and these, also take off the sprocket upper cover then pull the entire axle out ... (Posted in: PICS)
IMG_20140219_195303.jpg 639 hits | 75.68 KB | Posted: 2014-02-20 First take all these bolts out ... (Posted in: PICS)
![securedownload[1].jpg](https://www.supermotors.net/getfile/970297/thumbnail/securedownload[1].jpg)
![securedownloa1].jpg](https://www.supermotors.net/getfile/970296/thumbnail/securedownloa1].jpg)
.jpg)
