DSC05193.jpg 530 hits | 58.56 KB | Posted: 2010-09-10 After soaking the spindle in PB blaster for 2 days it was ready to come off. Still took some finagling but it did come off! Then, dust shield, caliper bracket, axle. Now all thats left is the Knuckle but it will wait until the pumpkin gets a rebuild.... (Posted in: D44 Hub/Rotor/Spindle removal.)
DSC05192.jpg 510 hits | 45.85 KB | Posted: 2010-09-08 Parts in order. Top left to bottom right. Only thing a bit out of place is the tension screw that go's into the outer housing... but it wont go much place else XD.
*Note - between the spring clip and housing is a spring.... (Posted in: D44 Hub/Rotor/Spindle removal.)
DSC05191.jpg 628 hits | 67.01 KB | Posted: 2010-09-08 I pulled on the hub a bit to get that bearing loose.... (Posted in: D44 Hub/Rotor/Spindle removal.)
DSC05190.jpg 591 hits | 72.93 KB | Posted: 2010-09-08 All thats left is that bearing and pulling the rotor/hub.... (Posted in: D44 Hub/Rotor/Spindle removal.)
DSC05188.jpg 562 hits | 48.1 KB | Posted: 2010-09-08 Second axle nut. Also showing how the socket works... when it works lol.... (Posted in: D44 Hub/Rotor/Spindle removal.)
DSC05187.jpg 495 hits | 63.94 KB | Posted: 2010-09-08 Axle nut washer coming out. Using a very small screw driver and some patience.... (Posted in: D44 Hub/Rotor/Spindle removal.)
DSC05186.jpg 524 hits | 43.73 KB | Posted: 2010-09-08 Poor flathead is now a new sort of tool. One that will be beat with many O' hammers.... (Posted in: D44 Hub/Rotor/Spindle removal.)
DSC05185.jpg 535 hits | 50.65 KB | Posted: 2010-09-08 Ahh, with a bit of tool destruction! Whammo, she's off. Grumble.... (Posted in: D44 Hub/Rotor/Spindle removal.)
