SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Machined aluminum block with square gasket on a cluttered workbench with tools and WD-40
Home/ Registry/ Jeep/ Grand Cherokee/ 1993 Grand Cherokee supermotors.net/registry/19167

1993 Jeep Grand Cherokee

documented by police351 10 photos documented since ♡ Follow this build

Photos

1993 Jeep Grand Cherokee — Ok, I decided to make a throttle body spacer for my jeep. I've heard they aren't worth much on the 4.0 but I… 1993 Jeep Grand Cherokee — This time the flash worked so you can see the pile of stuff the 1x3.5x12 6061 bar is sitting on. If you work… Using the hole saw to get a better idea of where the center of the hole is. It's surprisingly hard to find th… 1993 Jeep Grand Cherokee — Find the center of the hole, deeply center punch and drill the 1/4" pilot hole. First use the hole saw to cut a hole in a piece of hard wood so that the hole saw won't wander around when it… 1993 Jeep Grand Cherokee — All set up to bore out the center hole. everything is clamped down so it won't move around. See how the wood… 1993 Jeep Grand Cherokee — Once the hole is started switch the wood to the bottom. 1993 Jeep Grand Cherokee — This takes a long time. You need a sharp hole saw and lots of time and oil. I found it worked best to pulse t… 1993 Jeep Grand Cherokee — The hole is cut and the sides trimmed to almost the finnished dimension. 1993 Jeep Grand Cherokee — So I got carried away and finished with no more pictures. I filed and ground and sanded the sides until they…
See every Jeep Grand Cherokee in the registry

The peanut gallery

No comments yet — be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot — the owner approves it onto the record.