Picked up free compressor.JPG
74 hits | 104.39 KB | Posted: 7/6/05
My "free" compressor. Warehouse manager wanted it tossed due to it poping circuit breakers. Hmmm ...

12 foot of 2x3x11 gauge ready to cut.JPG
43 hits | 65.3 KB | Posted: 7/6/05
Lets start by making a mobile base for the compressor so I can easily move it from my limited work a...

Marking off 2 four foot sections.JPG
26 hits | 76.04 KB | Posted: 7/6/05
Marked off 2, four foot sections. Used tape to mark with as my dungeon is kind of dark for working....

marked off with tape and ready to cut with por.JPG
51 hits | 76.58 KB | Posted: 7/6/05
Got the sections marked and ready to cut with my Harbor Freight "porta band" saw. This saw really r...

two cut and ready to clean.JPG
30 hits | 73.35 KB | Posted: 7/6/05
The two four foot sections cut and ready to wire brush clean.

marked for compressor foot hole.JPG
68 hits | 94.95 KB | Posted: 7/6/05
Marking off for the 1/2" holes that will bolt the compressor to the rails.

marked for compressor foot hole closeup.JPG
89 hits | 95.64 KB | Posted: 7/6/05
Close up of foot mounting hole marking. I use a black arrow to point out the location of the hole. ...

test fitting 5 inch castors.JPG
73 hits | 80.53 KB | Posted: 7/6/05
Test fitting the 5" Harbor Freight castors. Finest slave labor made Chinese castors known to man.

mounting castors.JPG
65 hits | 81.06 KB | Posted: 7/6/05
Kind of a dark image of me mounting the castors.

compressor mounted.JPG
54 hits | 81.75 KB | Posted: 7/6/05
Compressor mounted and project about 1/2 done.

detail on foot and castor.JPG
85 hits | 78.51 KB | Posted: 7/6/05
Detail shot of foot and castor 1.

detail on foot and castor 2.JPG
87 hits | 76 KB | Posted: 7/6/05
Detail shot of foot and castor 2.

end view far.JPG
46 hits | 79.92 KB | Posted: 7/6/05
End view far.

end view close.JPG
38 hits | 76.06 KB | Posted: 7/6/05
End view close.

other side view.JPG
41 hits | 87.66 KB | Posted: 7/6/05
Other side view.