SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992–1996/ “Shadofax”/ ShocksnMounts supermotors.net/registry/628/13094

Album section

ShocksnMounts

From 1995 Ford Bronco “Shadofax” — documented by Mark Zoelch.

16 photos
← Back to this vehicle
1995 Ford Bronco - Before... 1995 Ford Bronco - Close-up view of the rear shock absorber and associated brake lines, showing the mounting hardware and suspension components. 1995 Ford Bronco - The Plan.... 1995 Ford Bronco - After.... 1995 Ford Bronco - Underside view of a vehicle's rear axle, leaf springs, and shock absorbers. 1995 Ford Bronco - Upper rear shock mount. took stock mount, cut rivets and bolted it up higher, after a little cutting. This eventually broke. next several p… 1995 Ford Bronco - another shot of the former mount. 1995 Ford Bronco - New upper rear shock mount. two plates are used. This pic is of the plate attached to the outside of the frame. 1995 Ford Bronco - A bracket is attached to the vehicle's frame, showing part of the suspension and tire. 1995 Ford Bronco - Inside plate comes together with outside plate above the frame, where a hole was drilled for the shock stud mount. 1995 Ford Bronco - Close-up view of the undercarriage, focusing on the shock absorber and exhaust system components. 1995 Ford Bronco - small local steel shop that had bending equipment cut the 5" wide strips and made the bends after hours...cost 1 case o beer. 1995 Ford Bronco - Each plate is 5" wide, 3/16" plate steel. That might seem thin, but remember that they come together on top where the shock mounts, thus ma… 1995 Ford Bronco - Close-up of a white rear shock absorber, part number RS29010, mounted to vehicle suspension. 1995 Ford Bronco - this shows how I now have an eyelet mounting up front instead of the stud mounting. 1995 Ford Bronco - Front shock...had to flip it due to knuckle under project and clearance between the rancho firmness setting knob and the steering rod. EDIT…