File 23 of 50
Prev | Next


p1200044.jpg | Hits: 4116 | Posted on: 1/21/07 | View Low-Res

Next up, remove the nut from the rear eye-bolt of the leaf spring. Simply punch the bolt through the hole with a hammer. Make sure not to crush the threads. You may need to use a 3/8" extension (6 inches in length) to punch the bolt all the way through.

Tools Needed:
24mm socket (nut)
21mm socket (bolt head)
1/2" ratchet or breaker bar
1/2" impact wrench
3/8" extension (6")
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2017 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited. v5.0.2 ChangeLog