Parts.jpg
480 hits | 70.02 KB | Posted: 1/3/04
what is included in the Auburn Mini Spool kit

Cover before.jpg
252 hits | 77.86 KB | Posted: 1/3/04
Rear end on jack stands

remove tire.jpg
229 hits | 77.92 KB | Posted: 1/3/04
remove the both rear tires

remove drum.jpg
248 hits | 80.15 KB | Posted: 1/3/04
remove the drums

remove cover.jpg
383 hits | 92.38 KB | Posted: 1/3/04
remove the diff cover, and catch as much fluid as you can to reduce the clean-up afterwards

missed the can.jpg
336 hits | 53.04 KB | Posted: 1/3/04
I sorta missed my catch can

gears.jpg
511 hits | 85.22 KB | Posted: 1/3/04
remove the side gears and the pinion gears

remove old gasket.jpg
365 hits | 79.77 KB | Posted: 1/3/04
my pops removing the old gasket from the cover

sidegear comparison.jpg
535 hits | 70.57 KB | Posted: 1/3/04
comparison of a side gear and the mini spool side gear

c-clip.jpg
353 hits | 64.41 KB | Posted: 1/3/04
I had to grind a small bit off each C-clip for them to fit with the mini-spool installed

me working 1.jpg
327 hits | 84.01 KB | Posted: 1/3/04
It would have been nicer to have a bit more room to work

spool installed.jpg
680 hits | 101.71 KB | Posted: 1/3/04
the assembled rear diff with the mini spool installed

gasket.jpg
303 hits | 77.13 KB | Posted: 1/3/04
installed a new gasket and with some high-temp silicone (it's all i had on hand)

workspace 1.jpg
329 hits | 82.94 KB | Posted: 1/3/04
my workspace...it's a little cramped in the carport with my big ole bronco in there

workspace 2.jpg
295 hits | 93.09 KB | Posted: 1/3/04
here's another view

decal.jpg
305 hits | 67.65 KB | Posted: 1/3/04

decal close up.jpg
306 hits | 85.18 KB | Posted: 1/3/04

Instuctions.jpg
351 hits | 40.58 KB | Posted: 1/3/04
I never did get around to reading this....maybe i should have? Guess time will tell....

Richmond Gear spool 1.jpg
323 hits | 52.71 KB | Posted: 10/19/04

Richmond Gear spool 2.jpg
370 hits | 50.54 KB | Posted: 10/19/04

Richmond Gear spool 3.jpg
285 hits | 41.9 KB | Posted: 10/19/04