01CIS.JPG
77 hits | 90.66 KB | Posted: 3/3/07
I got this from Meritline for ~$100 on sale.

02Parts.JPG
48 hits | 82.48 KB | Posted: 3/3/07
This is what's in the box.

03CartridgeCover.JPG
64 hits | 92.6 KB | Posted: 3/3/07
After reading the included instructions, I decided to do it a LITTLE differently. First, I removed ...

04Side.JPG
64 hits | 85.91 KB | Posted: 3/3/07
The instructions say to run the tubes out the angled forward area of the cover, but I didn't want th...

05Notched.JPG
63 hits | 83.28 KB | Posted: 3/3/07
Using a Dremel-type tool, I carved a small notch into the side of the cover. Even if I removed the ...

06Tubes.JPG
66 hits | 90.8 KB | Posted: 3/3/07
This just looks neater to me.

07Cover.JPG
63 hits | 81.36 KB | Posted: 3/3/07
The instructions also say to route the tubes out the side of the outer cover, but I didn't like that...

08Notch.JPG
67 hits | 62.5 KB | Posted: 3/3/07
A little Dremelling later...

09Clips.JPG
55 hits | 72.59 KB | Posted: 3/3/07
With the power off, the carriage can be slid fully to the LEFT (since I've decided to route the tube...

10Clips.JPG
61 hits | 57.59 KB | Posted: 3/3/07
It took some tweaking to get them to sit flat without pinching the tubes, but they're clear of the s...

11Done.JPG
53 hits | 85.36 KB | Posted: 3/3/07
It's almost invisible. Compare this to the first photo. The cover doesn't sit all the way down bec...

12Done.JPG
73 hits | 70.27 KB | Posted: 3/3/07
The tubes are long enough (with some to spare) to place the tanks on the left behind the white speak...

Instructions.JPG
88 hits | 45.05 KB | Posted: 3/3/07
Instruction sheets