DSC05193.jpg
530 hits | 58.56 KB | Posted: 9/10/10
After soaking the spindle in PB blaster for 2 days it was ready to come off. Still took some finagling but it did come off! Then, dust shield, caliper bracket, axle. Now all thats left is the Knuckle but it will wait until the pumpkin gets a rebuild.

DSC05192.jpg
510 hits | 45.85 KB | Posted: 9/8/10
Parts in order. Top left to bottom right. Only thing a bit out of place is the tension screw that go's into the outer housing... but it wont go much place else XD.

*Note - between the spring clip and housing is a spring.

DSC05191.jpg
628 hits | 67.01 KB | Posted: 9/8/10
I pulled on the hub a bit to get that bearing loose.

DSC05190.jpg
591 hits | 72.93 KB | Posted: 9/8/10
All thats left is that bearing and pulling the rotor/hub.

DSC05188.jpg
562 hits | 48.1 KB | Posted: 9/8/10
Second axle nut. Also showing how the socket works... when it works lol.

DSC05187.jpg
495 hits | 63.94 KB | Posted: 9/8/10
Axle nut washer coming out. Using a very small screw driver and some patience.

DSC05186.jpg
524 hits | 43.73 KB | Posted: 9/8/10
Poor flathead is now a new sort of tool. One that will be beat with many O' hammers.

DSC05185.jpg
535 hits | 50.65 KB | Posted: 9/8/10
Ahh, with a bit of tool destruction! Whammo, she's off. Grumble.

DSC05183.jpg
616 hits | 32.98 KB | Posted: 9/8/10

DSC05191.jpg
628 hits | 67.01 KB | Posted: 9/8/10
I pulled on the hub a bit to get that bearing loose.

DSC05183.jpg
616 hits | 32.98 KB | Posted: 9/8/10

DSC05161.jpg
600 hits | 26.97 KB | Posted: 9/2/10
These really need replacing........ but NOBODY carries anything like it

DSC05120.jpg
596 hits | 27.42 KB | Posted: 9/2/10
the new box

DSC05182.jpg
593 hits | 59.76 KB | Posted: 9/8/10

DSC05190.jpg
591 hits | 72.93 KB | Posted: 9/8/10
All thats left is that bearing and pulling the rotor/hub.

DSC05159.jpg
585 hits | 33.27 KB | Posted: 9/2/10

DSC05178.jpg
577 hits | 64.9 KB | Posted: 9/8/10
Pulled hub cap, ready to go.

DSC05188.jpg
562 hits | 48.1 KB | Posted: 9/8/10
Second axle nut. Also showing how the socket works... when it works lol.