DSC05167.jpg
409 hits | 57.92 KB | Posted: 9/8/10

Got a D44 and a 10.25 from gijoe on fullsizebronco.com. Thanks again man.
DSC05169.jpg
361 hits | 47 KB | Posted: 9/8/10

DSC05170.jpg
522 hits | 49.3 KB | Posted: 9/8/10

D44 chunk.
DSC05171.jpg
380 hits | 66.26 KB | Posted: 9/8/10

DSC05172.jpg
393 hits | 75.85 KB | Posted: 9/8/10

DSC05178.jpg
548 hits | 64.9 KB | Posted: 9/8/10

Pulled hub cap, ready to go.
DSC05179.jpg
414 hits | 53.95 KB | Posted: 9/8/10

Remove C clamp ring.
DSC05180.jpg
429 hits | 43.15 KB | Posted: 9/8/10

Undo tension screw then remove gear.
DSC05181.jpg
433 hits | 65.08 KB | Posted: 9/8/10

Damn that nut. cant get it off.
DSC05182.jpg
567 hits | 59.76 KB | Posted: 9/8/10

DSC05183.jpg
588 hits | 32.98 KB | Posted: 9/8/10

DSC05185.jpg
504 hits | 50.65 KB | Posted: 9/8/10

Ahh, with a bit of tool destruction! Whammo, she's off. Grumble.
DSC05186.jpg
496 hits | 43.73 KB | Posted: 9/8/10

Poor flathead is now a new sort of tool. One that will be beat with many O' hammers.
DSC05187.jpg
470 hits | 63.94 KB | Posted: 9/8/10

Axle nut washer coming out. Using a very small screw driver and some patience.
DSC05188.jpg
537 hits | 48.1 KB | Posted: 9/8/10

Second axle nut. Also showing how the socket works... when it works lol.
DSC05190.jpg
564 hits | 72.93 KB | Posted: 9/8/10

All thats left is that bearing and pulling the rotor/hub.
DSC05191.jpg
602 hits | 67.01 KB | Posted: 9/8/10

I pulled on the hub a bit to get that bearing loose.
DSC05192.jpg
479 hits | 45.85 KB | Posted: 9/8/10

Parts in order. Top left to bottom right. Only thing a bit out of place is the tension screw that go...
DSC05193.jpg
498 hits | 58.56 KB | Posted: 9/10/10

After soaking the spindle in PB blaster for 2 days it was ready to come off. Still took some finagli...

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog