P3120313.JPG
694 hits | 47.76 KB | Posted: 3/12/12
Clearance between crank pulley and rack and pinion...not much

P3120312.JPG
336 hits | 54.46 KB | Posted: 3/12/12

P3120311.JPG
305 hits | 62.01 KB | Posted: 3/12/12
Can't ask for much better shifter placement than that!

P3120310.JPG
288 hits | 60.89 KB | Posted: 3/12/12

P3120309.JPG
302 hits | 47.33 KB | Posted: 3/12/12
Wasn't sure it was going to fit at first, but ended up with about a fingers clearance

P3120307.JPG
292 hits | 64.63 KB | Posted: 3/12/12

P3120306.JPG
311 hits | 57.19 KB | Posted: 3/12/12

P3120305.JPG
300 hits | 59.64 KB | Posted: 3/12/12

P3120304.JPG
266 hits | 82.16 KB | Posted: 3/12/12

P3120303.JPG
354 hits | 71.5 KB | Posted: 3/12/12
No hoist!!

P3110297.JPG
303 hits | 81.74 KB | Posted: 3/12/12

P3110296.JPG
318 hits | 83.53 KB | Posted: 3/12/12

P3110295.JPG
284 hits | 57.02 KB | Posted: 3/12/12

P3110294.JPG
301 hits | 54.49 KB | Posted: 3/12/12

P3110293.JPG
319 hits | 59.09 KB | Posted: 3/12/12

P3110292.JPG
323 hits | 59.46 KB | Posted: 3/12/12

P3110289.JPG
433 hits | 61.88 KB | Posted: 3/12/12

P3110288.JPG
476 hits | 64.16 KB | Posted: 3/12/12

P3110286.JPG
318 hits | 67.57 KB | Posted: 3/12/12

P3110285.JPG
333 hits | 71.66 KB | Posted: 3/12/12
Drivers side brace

P3110281.JPG
344 hits | 53.21 KB | Posted: 3/12/12
Passenger brace

P3110275.JPG
318 hits | 80.27 KB | Posted: 3/12/12
Motor mount plates, just welded a piece of 3/16 over the stock f-body plates.

P3110273.JPG
337 hits | 80.53 KB | Posted: 3/12/12

P3110272.JPG
322 hits | 67.69 KB | Posted: 3/12/12

P3100271.JPG
486 hits | 88.3 KB | Posted: 3/12/12

P3100270.JPG
484 hits | 82.91 KB | Posted: 3/12/12

P3100269.JPG
305 hits | 74.14 KB | Posted: 3/12/12

P3050267.JPG
294 hits | 48.82 KB | Posted: 3/12/12
T56 Slave fitting, just pop out the pin and remove the GM quick connect fitting and this thing slide...

P3050265.JPG
570 hits | 65.79 KB | Posted: 3/12/12
Just ordered a 90 degree fitting cause I thought it might make it out of the tranny...wrong!

P3050264.JPG
318 hits | 69.14 KB | Posted: 3/12/12

P3050263.JPG
636 hits | 77.31 KB | Posted: 3/12/12
Other project taking up my shop space. 1975 Trans Am.

P3050262.JPG
586 hits | 77.24 KB | Posted: 3/12/12
Big shop, and still can't fit my new project in