SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992–1996/ “Bronkzilla”/ SAS Stuff supermotors.net/registry/1249/17489

Album section

SAS Stuff

From 1995 Ford Bronco “Bronkzilla” — documented by Rafael Esqueda.

15 photos
← Back to this vehicle
1995 Ford Bronco - Used 4"x8"x1/4" steel and cut them at about 15 degrees to relieve the stress on the bushing at ride height. 1995 Ford Bronco - Shows the angle. 1995 Ford Bronco - Welded a 3/16" thick plate to the top. It is then bolted and welded to the frame. 1995 Ford Bronco - For the trac bar mount i used 2.5"x2.5"x1/4" steel 1995 Ford Bronco - Chopped it up and welded it together. 1995 Ford Bronco - This just shows the piece that will be welded to the mount and connect to the crossmember under the engine. 1995 Ford Bronco - I cut the opening for the bushing and marked the hole for the bolt. Also welded a piece of 1/4" thick steel to one inside wall so that the… 1995 Ford Bronco - Welded it to the frame and then welded the brace on (not visible) 1995 Ford Bronco - Close-up of a heavily modified truck suspension system, showing custom components and heavy-duty parts. 1995 Ford Bronco - The vehicle's front axle and suspension components are visible while it is supported by jack stands. 1995 Ford Bronco - Close-up view of a vehicle's undercarriage, focusing on the suspension and drivetrain components. 1995 Ford Bronco - Detailed view of the front suspension and steering system, a red shock absorber and various linkage components. 1995 Ford Bronco - Close-up of a vehicle's front axle and suspension system, showing various mechanical components. 1995 Ford Bronco - The photo shows the suspension and brake assembly of a vehicle, not a complete vehicle. 1995 Ford Bronco - Close-up view of the vehicle's undercarriage, showing the front axle and suspension system.