1993 Ford Bronco
Owner: broncofocused         (All of this user's registries on SuperMotors)
From: Lyman, ME, U.S.A.        (Other registries in ME)
Year, Make, & Model: 1993 Ford Bronco        (Other Ford Broncos)
Avatar:
Nickname: Super Bronco
Mileage: 86500
Engine: 351W
Drivetrain: E4OD, 8.8 with onelegger 3.55s for now
Notes: Work in progress, but couldn't beat the price of $0 from the girlfriends parental units.
Last Updated: 5/20/2018
Hits: 34114
Album
Folder Hits Comments Created Updated
folder Soft Top Fab & Install140030,09805/19/075/20/07
folder The Fleet10083305/20/075/20/07
folder Parts 4 Sale2230036,78408/20/075/20/18
    folder Rampage Soft Top40053205/2/135/2/13
    folder 93 Part Out1090013,01205/6/1310/16/13
    folder Cargo Net80076805/20/185/20/18
folder MAF & Harness9003,690010/18/0710/18/07
folder SAS Info7001,80202/4/082/4/08
folder Fast Track Soft Top - FOR SALE26009,96503/8/083/8/08
folder Other20059903/26/083/26/08
folder Black Wheels17007,38604/11/084/13/09
folder 84 Bronco - Parts Truck240012,68805/1/086/22/08
folder Skyler Soft Top9005,904011/16/0811/16/08
folder Blade Wheels5001,80501/4/094/13/09
folder The Beginning20056704/13/094/13/09
folder Bumper Build12004,69205/3/096/14/09
folder 2009 Summer30084905/5/095/5/09
folder Random10025306/2/096/2/09
folder 95 Parts Truck900012,92506/11/1212/24/12
Newest Media Files
CargoNetBronco (8).JPG
107 hits | 78.56 KB | Posted: 5/20/18

CargoNetBronco (7).JPG
96 hits | 92.52 KB | Posted: 5/20/18

CargoNetBronco (6).JPG
103 hits | 91.68 KB | Posted: 5/20/18

CargoNetBronco (5).JPG
92 hits | 88.14 KB | Posted: 5/20/18

CargoNetBronco (4).JPG
109 hits | 76.8 KB | Posted: 5/20/18

CargoNetBronco (3).JPG
92 hits | 72.71 KB | Posted: 5/20/18

CargoNetBronco (2).JPG
88 hits | 75.25 KB | Posted: 5/20/18

CargoNetBronco (1).JPG
81 hits | 83.18 KB | Posted: 5/20/18

SkylerSoftTopBronco (1).JPG
63 hits | 80.95 KB | Posted: 5/20/18

Most Viewed Files
Cab Mount Top Driver Side2.JPG
6010 hits | 49.56 KB | Posted: 5/20/07

Here is the mount on the driver's side of the top. For now I simply have small bolts attaching the cab channel to the aluminum brackets. I plan on having a friend Tig weld them at a later point if the thin aluminum channel will hold up to the heat.
84 Softtop (2).JPG
2415 hits | 34.36 KB | Posted: 6/22/08

Custom made boat canvas Fastback style soft top, no rear window. Snaps attached to body.
Cab Mount Driver Side.JPG
2242 hits | 46.5 KB | Posted: 5/20/07

The side cab bracket dimensions are almost the opposite of the top mounts. Bolt hole location in all brackets was determined by the snap location on the cab mount channels.
Bed Sides.JPG
2140 hits | 54.5 KB | Posted: 5/20/07

I bent 90 degree brackets out of aluminum bar to mount the shortened tonneau cover bed rails to the original hardtop mounting holes.
Completely Snapped.JPG
2097 hits | 69.7 KB | Posted: 5/20/07

Here's the rear window full snapped on the fabricated channel. There is about a half inch gap between the aluminum channel and the top of the tailgate. I have some rubber seal that I'll put on the bottom of the channel to help seal this up.
Cab Mounts.JPG
2074 hits | 73.39 KB | Posted: 5/19/07

Cab channels mounted using 5 fabricated aluminum brackets which bolt to hardtop bolt locations.
Rear Rail (1).JPG
1999 hits | 43.39 KB | Posted: 5/20/07

After cutting the tonneau cover side rails to length and notching them on the inside to accept a cross bar, I cut a section of Aluminum channel to length to use as the rear rail. I then drilled holes in the rear of the side rails and the ends of the ...
Mount Bracket Fabrication (1).JPG
1990 hits | 42.33 KB | Posted: 5/20/07

To make the mount brackets, I bought 1/8" thick aluminum bar that can be found at Lowes or HD. I used some 1" wide for the bedsides and 3" wide for the cab mounts. To bend it I simply placed the measured short end into the vice and bent a 90 degree a...
Mount Bracket Fabrication (2).JPG
1888 hits | 52.36 KB | Posted: 5/20/07

I then tightened up the bend with a hammer. Not very professional, but highly affective. Initially I did use a small torch to put some heat into the aluminum before bending, but it didn't appear to make any difference in the process.
Maintenance & Modification Logs
This user hasn't added any log entries, yet.
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog