SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Crown Victoria/ 1992–1997/ “Vicky (totalled & shredded)”/ OBD-II Conversion supermotors.net/registry/6098/22904

Album section

OBD-II Conversion

From 1994 Ford Crown Victoria “Vicky (totalled & shredded)” — documented by Steve83.

75 photos
← Back to this vehicle
1994 Ford Crown Victoria - 1994 Connectors 1994 Ford Crown Victoria - 1994 Connector Pinouts 1994 Ford Crown Victoria - 1994 Fuse panels 1994 Ford Crown Victoria - I've collected a few cop PCMs to test when I get the engine installed, and I'll probably keep one spare & sell one. Ultimately, I went with… 1994 Ford Crown Victoria - 1994 Dash harness (14401) connectors 1994 Ford Crown Victoria - 1994 Relays 1994 Ford Crown Victoria - 1994 Dash harness (14401) connectors 1994 Ford Crown Victoria - 1994 Dash harness (14401 & 12614) connectors 1994 Ford Crown Victoria - 1994 Dash harness (14401 & 12614) connectors 1994 Ford Crown Victoria - 1994 Engine bay harness (14290) connectors 1994 Ford Crown Victoria - 1994 Engine bay harness (14290) connectors 1994 Ford Crown Victoria - 1994 Engine bay harness (14290) connectors 1994 Ford Crown Victoria - 1994 Engine bay harness (14290) connectors 1994 Ford Crown Victoria - 1994 Engine bay harness (14290) connectors 1994 Ford Crown Victoria - 1994 EEC harness (12A581) connectors 1994 Ford Crown Victoria - 1994 EEC harness (12A581) connectors 1994 Ford Crown Victoria - 2000 Connectors The circled ones are what I have to splice onto the '94 dash harness. 1994 Ford Crown Victoria - 2000 Connector Pinouts 1994 Ford Crown Victoria - 2000 Fuse panels 1994 Ford Crown Victoria - 2000 Relays 1994 Ford Crown Victoria - 2000 Engine bay harness (14290) connectors 1994 Ford Crown Victoria - 2000 Engine bay harness (14290) connectors 1994 Ford Crown Victoria - 2000 Engine bay harness (14290) connectors 1994 Ford Crown Victoria - 2000 Engine bay harness (14290) connectors 1994 Ford Crown Victoria - 2000 EEC harness (12A581) connectors 1994 Ford Crown Victoria - 2000 EEC harness (12A581) connectors 1994 Ford Crown Victoria - List of circuits, pins, & necessary mods. Pins not listed are empty on the harnesses I have. All modifications will be done on the 94 harne… 1994 Ford Crown Victoria - I bought a wide variety of colors & sizes of wire to try to mimic factory colors as closely as possible. [url=http://www.supermotors.net/re… 1994 Ford Crown Victoria - Turns out I had to pull the dash to continue with rewiring. I wanted to avoid it, but it was easier than I expected. 1994 Ford Crown Victoria - Turns out I had to pull the dash to continue with rewiring. I wanted to avoid it, but it was easier than I expected. 1994 Ford Crown Victoria - Turns out I had to pull the dash to continue with rewiring. I wanted to avoid it, but it was easier than I expected. 1994 Ford Crown Victoria - Just a reference shot. 1994 Ford Crown Victoria - Just a reference shot. 1994 Ford Crown Victoria - I set the dash on the front of the car to work on the wiring. 1994 Ford Crown Victoria - I set the dash on the front of the car to work on the wiring. 1994 Ford Crown Victoria - Several circuits have to be added across the dash, and some are deleted. 1994 Ford Crown Victoria - FINISHED!!! ...with the R side of the dash harness where it enters the engine bay. 1994 Ford Crown Victoria - The remote starter installation will be cleaned up now. 1994 Ford Crown Victoria - Just a reference shot. 1994 Ford Crown Victoria - Just a reference shot. 1994 Ford Crown Victoria - Just a reference shot. 1994 Ford Crown Victoria - Just a reference shot. 1994 Ford Crown Victoria - Just a reference shot. 1994 Ford Crown Victoria - DLC 2000 CV,GM 1994 Ford Crown Victoria - The L dash wiring is almost finished. 1994 Ford Crown Victoria - Most of the wiring is cleaned up & covered with split loom. The blue wires are some spares fed by engine compartment fuses that I'll probab… 1994 Ford Crown Victoria - The RKE/start wiring has been soldered in (with a few minor modifications) and the FTP & CANV wires run thru the connectors in the lower L.… 1994 Ford Crown Victoria - The RKE barely fits under the autolamp module. The wires that run under the steering column area were placed there before I knew the dash h… 1994 Ford Crown Victoria - Everything is finished & tucked in so the dash can be reinstalled without pinching any wires. 1994 Ford Crown Victoria - Everything is finished & tucked in so the dash can be reinstalled without pinching any wires. 1994 Ford Crown Victoria - Everything is finished & tucked in so the dash can be reinstalled without pinching any wires. 1994 Ford Crown Victoria - I repaired all the cuts from the original RKE installation, but some of those taped locations are from rearranging the ignition switch circ… 1994 Ford Crown Victoria - Everything is finished & tucked in so the dash can be reinstalled without pinching any wires. The purple wires near the headlight switch ar… 1994 Ford Crown Victoria - The new branch off the firewall harness with the white plug is the RKE wiring into the lock circuit. It will plug into the module below the… 1994 Ford Crown Victoria - The new branch off the firewall harness with the white plug is the RKE wiring into the lock circuit. It will plug into the module below the… 1994 Ford Crown Victoria - The purple wire is the RKE trigger for the trunk release; the orange is for a future outside temp sensor for the rear-view mirror; and wire… 1994 Ford Crown Victoria - Some wires in these connectors were rearranged, and the Bk/Wh wire is a main power feed that will tie into the dash harness. 1994 Ford Crown Victoria - The dash is finally going back in. Its harness on the R side is visible just below the paddle-shaped brace. 1994 Ford Crown Victoria - The interior of a car shows the dashboard removed, revealing exposed wiring and electronic components during a repair or modification. 1994 Ford Crown Victoria - The dash harness reaches the engine bay connectors better than I thought, considering I used many wires without lengthening them. 1994 Ford Crown Victoria - The L side dash harness being pulled thru. 1994 Ford Crown Victoria - The interior of a 1994 Ford Crown Victoria shows a disassembled dashboard with exposed wiring and components. 1994 Ford Crown Victoria - Even though not equipped, this harness is wired for Illuminated Entry & power antenna. 1994 Ford Crown Victoria - Close-up view of a complex vehicle interior wiring harness, showing numerous colorful wires and electrical connectors. 1994 Ford Crown Victoria - Close-up of a car's interior wiring and pedals, likely under the dashboard. 1994 Ford Crown Victoria - The complex network of wires and connectors under the dashboard of a vehicle is visible, along with the brake and accelerator pedals. 1994 Ford Crown Victoria - Close-up view of engine wiring harness and various electrical connectors. 1994 Ford Crown Victoria - Close-up of vehicle's under-dash wiring and fuse box, with pedals visible. 1994 Ford Crown Victoria - This photo shows the complex wiring and steering column components located beneath the dashboard of a vehicle. 1994 Ford Crown Victoria - The interior of a 1992 Ford Crown Victoria is disassembled, revealing its internal wiring and components. 1994 Ford Crown Victoria - The interior dashboard of a 1994 Ford Crown Victoria is shown with various components disassembled. 1994 Ford Crown Victoria - My odo: 187437 Donor's: 070020 UPDATE: 10/7/8 My odo stopped working shortly after the swap and I drove maybe 2 years without it, so I've l… 1994 Ford Crown Victoria - My cluster actually says "Low Coolant" where this diagram shows "Check Temp". 1994 Ford Crown Victoria - Cluster Bulbs '94 1994 Ford Crown Victoria - To make the gauge work with a real oil pressure sender, solder a jumper wire across the 20 Ohm resistor. I used a Wh/R wire because that's…