2004 Land Rover Land Rover Epson R200 CIS pictures, videos, and sounds


Hits: 859 Size: 90.66 KB Posted: 3/3/07 I got this from Meritline for ~$100 on sale.	Hits: 835 Size: 82.48 KB Posted: 3/3/07 This is what's in the box.	Hits: 896 Size: 92.6 KB Posted: 3/3/07 After reading the included instructions, I decided to do it a LITTLE differently. First, I removed ...	Hits: 799 Size: 85.91 KB Posted: 3/3/07 The instructions say to run the tubes out the angled forward area of the cover, but I didn't want th...	Hits: 992 Size: 83.28 KB Posted: 3/3/07 Using a Dremel-type tool, I carved a small notch into the side of the cover. Even if I removed the ...
Hits: 842 Size: 90.8 KB Posted: 3/3/07 This just looks neater to me.	Hits: 949 Size: 81.36 KB Posted: 3/3/07 The instructions also say to route the tubes out the side of the outer cover, but I didn't like that...	Hits: 809 Size: 62.5 KB Posted: 3/3/07 A little Dremelling later...	Hits: 671 Size: 72.59 KB Posted: 3/3/07 With the power off, the carriage can be slid fully to the LEFT (since I've decided to route the tube...	Hits: 731 Size: 57.59 KB Posted: 3/3/07 It took some tweaking to get them to sit flat without pinching the tubes, but they're clear of the s...
Hits: 743 Size: 85.36 KB Posted: 3/3/07 It's almost invisible. Compare this to the first photo. The cover doesn't sit all the way down bec...	Hits: 920 Size: 70.27 KB Posted: 3/3/07 The tubes are long enough (with some to spare) to place the tanks on the left behind the white speak...	Hits: 895 Size: 45.05 KB Posted: 3/3/07 Instruction sheets