|
|
Reinstall the u-bolts and tighten with the new nuts (discard the old nuts). Hand-tighten at first, ensuring each nut is threaded evenly, then tighten with a breaker bar.
Tools Needed:
21mm deep socket (nuts)
1/2" breaker bar or impact wrench if you're that good
|
![p1200082.jpg Reinstall the u-bolts and tighten with the new nuts (discard the old nuts). Hand-tighten at first, ensuring each nut is threaded evenly, then tighten with a breaker bar.
[b]Tools Needed:[/b]
21mm deep socket (nuts)
1/2" breaker bar or impact wrench if you're [i]that[/i] good](http://www.supermotors.net/getfile/476834/fullsize/p1200082.jpg)
