SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992–1996/ “Big '92”/ Sliders / Framerails supermotors.net/registry/2896/14000

Album section

Sliders / Framerails

From 1992 Ford Bronco “Big '92” — documented by Jeremy Millrood.

18 photos
← Back to this vehicle
1992 Ford Bronco - Heavy duty sliders built by Dave Edwards High Desert Off Road. These will be installed once I get around to drilling the holes in the frame. 1992 Ford Bronco - Sliders will be mounted with 16 1 1/2 inch grade 8 bolts with washers and locking washers. 1992 Ford Bronco - This is where the emergency brake cable runs along the drivers side frame rail. The slider will mount behind this. The bolts holding the fu… 1992 Ford Bronco - Towards the rear of the driver's side. 1992 Ford Bronco - Passenger side frame rail towards the front, this side will be much easier to do than the the driver's side. 1992 Ford Bronco - Passenger side rear. 1992 Ford Bronco - Front frender mount that needs to be trimmed all the way down in order to mount the slider flush with the rocker panel. 1992 Ford Bronco - Remove bolt that mounts fender, then use a 4 inch grinder to remove the metal where the mount originally was. 1992 Ford Bronco - This is what the fender mount will look like once it has been trimmed down. The grinder made pretty quick work of that metal. 1992 Ford Bronco - Once the mount was ground off we had to drill a hole further up to mount another bolt. Since you have some exposed steel here, take the tim… 1992 Ford Bronco - Passenger side slider mounted and held in place with one bolt. Undo the clips that hold the fuel return line and move them up and out of th… 1992 Ford Bronco - Here is the proof. Passenger side slider completely mounted and put to the test. Its holding the full weight of my Bronco the front tire is… 1992 Ford Bronco - Once the fender mount has been relocated on the driver's side, you have to unbolt these two nuts that go through the frame to a fuel hose b… 1992 Ford Bronco - On the rear of the driver's side there are bolts through the frame for the fuel filter bracket. Remove both of these, you will be able to p… 1992 Ford Bronco - driver's side front pad mount. There is a fuel line bracket that runs behind this mount, bolts to the brack must be removed and the bracket… 1992 Ford Bronco - Rear driver's side pad mounting, there is about a 1/4 inch clearance between the ebrake cable and the are. The holes drilled here, must be… 1992 Ford Bronco - This is behind the rear pad mount on the driver's side. You must remove the bolts holding the fuel filter bracket on. Once the pad is mount… 1992 Ford Bronco - 3M no slip tape.