calkins81 > 1993 Jeep Cherokee

1993 Jeep Cherokee
Owner: calkins81         (All of this user's registries on SuperMotors)
From: brimfield, IL, U.S.A.        (Other registries in IL)
Year, Make, & Model: 1993 Jeep Cherokee        (Other Jeep Cherokees)
Avatar:
Clubs: Fat Kid Motorsports        (Other vehicles in this club)
Nickname:
Mileage: 184000
Engine: 4.0 ltr H.O
Drivetrain: 4 speed auto, 242 t-case, open d-30 frt., open d-35 rear, 4 inch lift, w/ 33" BFG AT's
Notes: Bought from a guy I worked with for 400$. Don't know how hard he drove it but when I got it, it had a conecting rod stinking out of the block. I took my time putting in a JunkYard motor, the lift , and a few other things. Then it turned into my daily driver and weekend wheeler. From there it took off. I've built front and rear bumpers with recovery points to get better approach and departure angles, and added lights. I had to do some fender trimming when I added the 33's but was still able to put the stock fender flares back on. Now that I have another wheelin' rig this one can take it easy,
for now.
Last Updated: 5/8/2009
Hits: 4980
Album
Folder Hits Comments Created Updated
folder my shots6002,49508/23/065/8/09
folder MUDDING FOR KYLE100645010/21/0710/21/07
folder Next in LIne13007,80106/25/085/8/09
Newest Media Files
Dana 44 full size for the front axle
DSCF2408.JPG
773 hits | 69.87 KB | Posted: 5/8/09
Dana 44 full size for the front axle
Had to cut out alot of floor on pass. side
DSCF2403.JPG
729 hits | 76.49 KB | Posted: 5/8/09
Had to cut out alot of floor on pass. side
DSCF2402.JPG
DSCF2402.JPG
611 hits | 65.42 KB | Posted: 5/8/09
Making plating for uni-body out of 1/8" plate
DSCF2397.JPG
635 hits | 62.7 KB | Posted: 5/8/09
Making plating for uni-body out of 1/8" plate
Cutting rockers out, replacing w/ 3x5 tube
DSCF2392.JPG
614 hits | 66.23 KB | Posted: 5/8/09
Cutting rockers out, replacing w/ 3x5 tube
DSCF2379.JPG
DSCF2379.JPG
671 hits | 66.85 KB | Posted: 5/8/09
DSCF2357.JPG
DSCF2357.JPG
638 hits | 69.09 KB | Posted: 5/8/09
DSCF2346.JPG
DSCF2346.JPG
663 hits | 66.84 KB | Posted: 5/8/09
DSCF2345.JPG
DSCF2345.JPG
624 hits | 61.76 KB | Posted: 5/8/09
Most Viewed Files
Dana 44 full size for the front axle
DSCF2408.JPG
773 hits | 69.87 KB | Posted: 5/8/09
Dana 44 full size for the front axle
Had to cut out alot of floor on pass. side
DSCF2403.JPG
729 hits | 76.49 KB | Posted: 5/8/09
Had to cut out alot of floor on pass. side
mean green
1-06 random 037.jpg
711 hits | 88.51 KB | Posted: 8/23/06
mean green
DSCF2379.JPG
DSCF2379.JPG
671 hits | 66.85 KB | Posted: 5/8/09
DSCF2346.JPG
DSCF2346.JPG
663 hits | 66.84 KB | Posted: 5/8/09
Waitin' to get Dirty
100_1418.jpg
645 hits | 85.82 KB | Posted: 10/21/07
Waitin' to get Dirty
DSCF2357.JPG
DSCF2357.JPG
638 hits | 69.09 KB | Posted: 5/8/09
Making plating for uni-body out of 1/8" plate
DSCF2397.JPG
635 hits | 62.7 KB | Posted: 5/8/09
Making plating for uni-body out of 1/8" plate
DSCF2345.JPG
DSCF2345.JPG
624 hits | 61.76 KB | Posted: 5/8/09
Maintenance & Modification Logs
This user hasn't added any log entries, yet.