SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Crown Victoria/ 1998-2011/ “Flying Snow”/ Driver's side mirror housing replacement supermotors.net/registry/12078/50553

Album section

Driver's side mirror housing replacement

From 2001 Ford Crown Victoria “Flying Snow”, documented by Embassy Vic.

9 photos
← Back to this vehicle
2001 Ford Crown Victoria - Had to replace a broken driver's side mirror and its housing. 2001 Ford Crown Victoria - Close-up of a disassembled side mirror on a white sedan, showing the black plastic mirror housing pulled apart with the internal motor mech… 2001 Ford Crown Victoria - Black power side-view mirror assembly removed from a vehicle, its wiring harness and connector splayed out, with the separate black back co… 2001 Ford Crown Victoria - The housing is secured by three bolts. The replacement housing has 10mm nuts. 2001 Ford Crown Victoria - The mirror cap. Note the tabs. 2001 Ford Crown Victoria - When removing the door panel, do not forget this screw, that is exposed once you remove the door and window switch panel. 2001 Ford Crown Victoria - There is another screw behind the panel that surrounds the door handle . 2001 Ford Crown Victoria - Note the blue box, which is the auto down window unit. Also note the two wires in the lower portion of the picture that run to the fuel doo… 2001 Ford Crown Victoria - Pull back the trim to expose the three nuts that must be removed. The broken housing had 11mm nuts. You will need a deep socket extension.…