IMG_1371.JPG
205 hits | 54.77 KB | Posted: 3/2/14
Made my own bell mouth adapters to bump the 2.5" air intake tubing up to the 3" required f...

IMG_1375.JPG
162 hits | 52.37 KB | Posted: 3/2/14
I rerouted the fuel line through the front crossmember but it turned out that the new route was clos...

IMG_1374.JPG
237 hits | 59.23 KB | Posted: 3/2/14
The wire harness for the Taurus electric fan. That's a Saab relay block. It holds two relays and fou...

IMG_1461.JPG
151 hits | 54.43 KB | Posted: 4/28/14
Kinda blurry picture of the heat shield I put over the passenger side header. It's 22 gauge mild ste...

IMG_1460.JPG
182 hits | 49.81 KB | Posted: 4/28/14
Picture of the bracket I made to keep the clutch cable away from the header heat. It just clamps to ...

IMG_1476.JPG
181 hits | 75.92 KB | Posted: 5/6/14
Driver's side turbo with the finished air intake. Routed the blow off valve to the intake. That's an...

IMG_1477.JPG
184 hits | 71.6 KB | Posted: 5/6/14
Passenger side pretty much done. Heat shield protects the air intake. More heat shield on the fuel l...

IMG_1478.JPG
163 hits | 71.57 KB | Posted: 5/6/14
Driver's side air intake. MIG welder makes adding bits of steel easy. Barbecue paint dries very fast...